Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Datasheet Torque sensor 27 torque ranges from 0,02 Nm up to 20.000 Nm precise measurement of torque, rpm and angle of rotation Option „F“ with base Alternative fastening option, enables simplified attachment! Easy to assemble! Alignment in the longitudinal axis using a parallel key, oriented and unmistakable installation (for example after recalibration) by means of parallel pins Accessory mounting adapter Precise peak height adjustment to a desired level. Hole pattern is the same as option with base. Features • contactless signal transmission • integral signal amplifier • low moment of inertia • rpm measurement (optional) • angle of rotation measurement (optional) • advanced electromagnetic compatibility (EMC) • adjustable output level for rpm and angle signal (5 - 24 V) • larger rpm range for rpm and angle measurements • frequency output 10 kHz ± 5 kHz • larger input voltage range (10 - 28,8 V) • compact dimensions, universally applicable • strain gauge technology • option base • accesory mounting adapter • 0.05% linearity error option Subject to change without notice Series DRVL torque sensors are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and largely maintenance-free. These sensors are also available with optional rpm and angular measurement for a host of applications. The integrated signal amplifier is powered with 10 - 28,8 V DC and outputs an electrically isolated analog signals of 0 ± 10 V and 10 kHz ± 5 kHz The standard version has smooth shaft ends, several types are available with optional parallel keys (see table). A factory calibration certificate with 25% increments (left, right) is included in the scope of deliver

Electrical specifications DRVL Supply voltage: Power consumption: at Ub 12 V approx. 180 mA (switching converter 2.2 W) Voltage output: Output frequency: Output signal: Internal resistance: Nonlinearity/max. measurement error (of full scale): DRVL: DRVL-I to DRVL-V I: Deviation at zero point: Operating temperature: Compensated temperature range: Temperature error Zero point: Sensitivity: Mechanical overload: Internal protection: 12pin-connector (circular connector series 680) Interference emission Basic standard EN55011 Limit class B Immunity to interference Basic standard EN61000-4-2:2009 Electrostatic...

Mechanical dimensions DRVL measuring side Type Torque ranges: (± 0 - ... ) [Nm] messtechnik gmbh

Mechanical dimensions DRVL option „F“ with base measuring side DRVL-F DRVL-I-F DRVL-Ib-F DRVL-II-F DRVL-III-F DRVL-IV-F DRVL-V-F DRVL-VI-F Type Torque ranges: (± 0 - ... ) [Nm] messtechnik gmbh

Mechanical dimensions mounting adapter M-DRVL Design X measuring side measuring side Ordering code: M-[Sensor-type]-SH[peak height in mm] → Example: M-DRVL-II-SH65 messtechnik gmbh

Mechanical specifications DRVL Type Spring constant Mass moment of inertia [g x cm²] Total Ordering code DRVL - Drive side Measuring side Max. Max. axial load radial load Available accessories - messtechnik gmbh • ETH-Measurement cable  Op�on limit frequency 1 kHz  Op�on base  Op�on keyway  Standard accuray  Op�on higher accuray  Standard  Op�on speed  Op�on angle  Torque range (Nm)  Model/size • Display and evaluation devices • Couplings