Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Datasheet Torque Sensor Torque ranges from 1 Nm up to 10.000 Nm Square drive and either with or without angle function Features DRFN • No service needed because of contactless data acquisition • High noise immunity due to amplified active signal • High accuracy due to frequency modulation and strain gage technology • Single power supply • Optional angle detection • Integrated sensor-detection chip for use with GMV2 analyzer The sensor is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the Suitable for automotive industry test benches assembly applications pulsed tools electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. Models / Fittings Static retainer / clamping device for torque wrenches Subject to change without notice

Electrical specifications DRFN Supply voltage: Current consumption: Voltage output: Internal resistance: Deviation at zero point: Operating temperature: Compensated temperature range: Temperature error Zero point: Sensitivity Mechanical overload: Internal protection: 12pin-connector (circular connector series 680) Factory certificate for clockwise torque in 25% steps is also supplied. (Other calibrations available on request!) Detection of direction of rotation: 2 pulses 90° phase shift Channel A leading for clockwise rotation of drive end Ordering Code DRFN Analyser: ValueMasterbase GMV2 Cables...

Mechanical dimensions DRFN Internal and external square DIN 3121 (ISO standard 1174: 1975) Mechanical values and load limits DRFN with rotation angle measurement Size (inch) Torque range Overload (± 0 - ... Nm) (%) | 1 | 2 | 5 | 10 | 12 | 100 15 70 20 30 messtechnik gmbh

Mechanical Dimensions DRFN Static Holder (SH) The Static Holder (SH) is available on customer request for models DRFN ¾“, 1“, ½“ and DRFN ¾“-w, 1“-w, ½“-w. Ordering code Static Holder SH  SH-DRFN ¼“  SH-DRFN ⅜“  SH-DRFN ½“  SH-DRFN ¼“-w  SH-DRFN ⅜“-w  SH-DRFN ½“-w messtechnik gmbh