Datasheet torque sensor DRBK + DRBK-A
6Pages

Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Datasheet Torque Sensor DRBK + DRBK-A Torque ranges from 0,5 Nm to 1000 Nm Low-Cost Torque sensor Current output and voltage output Very short Measurement accuracy: ≤ 0.5% of full scale Contactless transfer of measurement signal Proven strain gage technology Integrated signal amplifier Single power supply wide range of applications Optional speed measurement Extra Features DRBK-A • • • • • • Simultaneous speed/torque indication 4-segment display with sign Peak mode (clockwise only) Indication area on LCD display 30 x 11 mm Speed indication updated 1x sample/second Torque updated 1,000 samples/second The Series DRBK torque sensors are suitable for lab and industrial applications because of their small size and multiple mounting options. Series DRBK-A torque sensors are custom made for applications where an extra analyzer should not be used or is not needed. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and nomaintenance. These sensors are also available with speed measurement for a host of applications. Production monitoring data can be clearly displayed at very small cost! Subject to change without notice

Technical Specifications: DRBK + DRBK-A Supply voltage: Current consumption: DRBK approx. 200 mA / DRBK-A approx. 250 mA Voltage output: Internal resistance: Current output: Deviation at zero point: Operating temperature: Compensated temperature range: Temperature error Zero point: Sensitivity: Mechanical overload: Internal protection: EMV Immunity for interference (DIN EN 61326-1 / EN 61000-6 ) *1 Enclosure HF line interference 150 kHz - 80 MHz (AM) Enclosure Electromagnetic Field 80 MHz - 1000 MHz (AM) 80 MHz - 2700 MHz (AM) Leads - Connection Cable Burst (fast transients) Surge voltage...

Mechanical Dimensions DRBK Sizes DRBK Type: Torque Ranges: (Nm) General tolerances DIN 2768 - m Weight approx.: (g) messtechnik gmbh

Mechanical Dimensions DRBK-A Sizes DRBK-A Sizes Torque Ranges (Nm) General tolerances DIN 2768 - m Weight approx. (g) Speed max. messtechnik gmbh

Technical Specifications DRBK + DRBK-A Sizes Measuring Torsion ShaftRange Type (Nm) Spring Mass Moment J (g•cm²) Permitted Permitted Constant C Axial load (N) * Radial load (N) * (Nm/rad) Total Drive Side Measuring Side *The values for axial and radial load refer to the non-fixed housing Features • The outputs are short-circuit proof • Signal output for „tranducer ready“ 100 mA, level = power supply Available Accessories Cables, Analyzers, Couplings Compatible Couplings Ordering Code Coupling Ordering Code DRBK- n  Option Speed only DRBK!  Torque Ranges A  with display Sensor model...

messtechnik gmbh