Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Datasheet Multipurpose Torque Meter for general stationary or mobile use Typical Applications: • Tool testing • Production supervising • Documentation compliant with DIN EN ISO 9001 • Quality Assurance • Test bench evaluation Standard for active torque sensors • Measurement of torque, speed and power • Measurement modes: tracking, peak (clockwise/ counterclockwise), torque wrench test • Menu-driven operation and adjustment • Storage for 1000 measurements • 50 programmable parameter sets • Power supply 110-240 V • RS 232C port, max. 19200 baud • Software `GMV2-PC-Trans΄ • EMC-proof housin • Multilingual The GMV2 is a microprocessor-based measurement and control unit for various torque-based applications. Measurement values for torque, speed and power (and optional angle) that are scanned with appropriate torque sensors in screwing applications and in test benches in labs can be displayed, their compliance with pre-set limits evaluated, and stored. The device is operated in simple steps via a self-explanatory menu. Using a torque transducer with integrated recognition chip, the sensor data will be transmitted automatically into the parameter set by connecting the transducer to GMV2. Subject to change without notice Options • Angle measurement • External control of storing, deleting and printing • External selection of parameter sets • Screwdriver control • Passive input for sensors 0.5–4 mV/V • Digital input for DRFD sensors • Analog output for torque signal • Battery operation for 8 hours Access to the device settings can be restricted by using passwords in three levels. Measurement data will be stored in the device in combination with date and time and they can be printed out on an external printer or exported for further processing. Option: a pulsed tool can be operated about a floating output. Option: integrated power unit for operating a power screwdri

Technical Specifications Power Supply Mains voltage:: 100 V - 240 V / 50 Hz - 60 Hz via IEC (power) connector simultaneous mains and charging mode with battery option Operating mode: Sensor power supply Option – Battery operation Supply voltage: Option – Digital input for sensor type DRFDxx Option – Passive input Input sensitivity: Active input: Input sensitivity: Input resistance: Zero adjustment range: approx. ± 7 % of full scale programmable from ± 0.5 mV/V to ± 4 V/V approx. ± 7 % of full scale Adjustment range: Sensor passive power supply 7 V DC 4-wire power supply 350 - 1000 Ω Option –...

• Measurement of torque, speed and power • Tracking mode with adjustable filter for torque and speed power measurement from 1 mW up to 20,000 kW continuous measurement output or periodic storage of values • Peak mode in clockwise or counter clockwise direction with - display status of peak measurement - adjustable correction factor for pulsed tools - adjustable moving average for torque - averaging surveillance function • Torque-wrench measurement with display of peak value at yielding point • 50 programmable measurement programs • Storage for 1000 measurement values • Adjustable erasing time...

System requirements: up to Win 10, Office 95 - 2016 messtechnik gmbh