Hagstraße 10 · 74417 Gschwend w w w.eth-messtechnik.de Microprocessor controlled evaluation ideal for mobile use in the outdoor area: Building sites, Off-shore, Shipyards, Mining, ... robust P impact resistant P waterproof P Application range: • Tool testing • production monitoring • Documentation according to DIN EN ISO 9001 • quality assurance Standard equipment for active sensors • Detection of torque, angle and speed • Measurement types: idler, peak (forward / reverse), wrenches • USB interface • Integrated performance • Menu-driven operation and adjustment • RS 232C interface to 19200 baud • 1000 measured values storable • 50 parameter sets can be programmed • Software ‚GMV2-PC-Trans‘ • Networking (Option: 4 hours battery mode) • tightening controller • AC adapter / charger • Output to Digimatic mini-processor printer • multilingual The GMV2-K is a microprocessor-controlled supply and display unit for various applications in torque-measurement. In screwing sector with appropriate sensors detected measurement values for torque and angle, speed and power can be displayed, evaluated conforming to pre-set limits and stored. The handling using a self-explanatory menu is carried out in simple steps. Using a torque transducer with integrated recognition chip the sensor data will be transmitted automatically into the parameter set by connecting the transducer to GMV2. For better distinction the parameter-sets and data-sets can be named with text. The access to the general settings can be limited by using passwords in three levels. The measured values will be internal stored in combination with date and time and they can be printed out by an external printer or transmitted to an existing EDP. Option: A hydraulic screwdriver can be controlled via a potential-free output. Option: Integrated power section for the operation of an electric screwdriver 230 V ma

Technical Specifications Supply voltage Power supply: Angle Option 100 V - 240V/50 Hz - 60 Hz über Kaltgerätestecker Simultaneous network and charging with battery Counting range: Sensor supply 2 tracks 360 pulses / revolution with Approx. 90 degree phase offset Operating mode: Input signals: INPUT activ: free programmable Battery Option Input sensitivity: Power supply: Input resistance: Operating time: approx. ± 7 % of full scale with continuous operation approx. 4 h (with transducer) Transformation Pulse rise rate: Option - Control output hydraulic screwdriver Relay output: U max : Peak measurement:...

Optional additional equipment • 1000 measured value memory • Detection of rotation angles • 50 freely adjustable measuring programs • Screw control via integrated power section • Self explanatory menu structure in several languages • Battery operated for 4 hours, Charger / power supply installed • Protection of device settings by password in 3 levels • Control output for hydraulic screwdrivers • Automatic transfer of transducer data and control the parameter set sensors with chip • Special options on request! • Detection of torque, speed and power • With adjustable filter - for torque and speed...

System requirements: up to Win 10, Office 95 - 2016