Cataloque Force sensors | Load cells | Analyzer
126Pages

{{requestButtons}}

Catalog excerpts

Cataloque Force sensors | Load cells | Analyzer - 1

messtechnik Force sensors | Load cells | Analyzers

Open the catalog to page 1
Cataloque Force sensors | Load cells | Analyzer - 2

General importer of APPLIED MEASUREMENT LIMITED Force sensor specialist since 1991 “Applied Measurements delivers high-quality force sensors and measurement solutions for all industries. Precision, reliability and expert knowledge of transducers make Applied Measurements one of the UK‘s leading transducer specialists and most importantly, keep our customers coming back to us. Applied measurements are certified according to quality management system ISO 9001: 2015. All products of the highest quality come with a 3-year guarantee.” ETH-messtechnik gmbh was founded in 1987 and has been...

Open the catalog to page 2
Cataloque Force sensors | Load cells | Analyzer - 3

Force sensors Load cells Multicomponent sensors messtechnik gmbh

Open the catalog to page 3
Cataloque Force sensors | Load cells | Analyzer - 4

messtechnik gmbh

Open the catalog to page 4
Cataloque Force sensors | Load cells | Analyzer - 5

Table of contents Commpression force sensors Type Measuring Protection range class Ring force sensor 12,5 kN • Integral load button • Output 1.5mV/V nominal • Accuracy <±0.5%/rated capacity • Robust construction Miniature button force sensor Subminiature button force sensor • Very compact • Low deflection • Output 1.5mV/V nominal • Accuracy <±1.5%/rated capacity typical • Suitable for use with metric and imperial bolt sizes • Integral load button • Output 2mV/V nominal (1.5mV/V on 0-100N) • Accuracy <±0.5%/rated capacity • Robust construction Micro button force sensor 10 N messtechnik gmbh...

Open the catalog to page 5
Cataloque Force sensors | Load cells | Analyzer - 6

Table of contents Tension and commpression force sensors Type Measuring Protection range class Miniature in-line force sensor 100 N Submersible Miniature in-line force sensor • Output: 2mV/V • Accuracy: <±0.3%/rated capacity • Integral male threads for in-line mounting • Low deflection • High natural frequency • Output: 0.5mV/V to 2mV/V • Accuracy: <±0.15%/rated capacity (0.05% typical) • Robust construction and very compact • Integral male threads for in-line mounting Pancake force sensor 5 kN • Output: 2mV/V • High frequency response • High accuracy <±0.05%/rated capacity • Low deflection...

Open the catalog to page 6
Cataloque Force sensors | Load cells | Analyzer - 7

Table of contents Platform load cells Type Measuring Protection range class Platform load cell / Single point load cell 10 kg • Output: 2 mV/V • High accuracy: < ±0.03 % of rated load • ATEX certificate: EEx ia IIC T4 • Designed for low range measurement applications • Lightweight & low cost Platform load cell / Single point load cell • Output: 2 mV/V • High accuracy: < ±0.03 % of rated load • ATEX certificate: EEx ia IIC T4 • Designed for low range measurement applications • Lightweight & low cost Bending and shear force load cells Type Measuring Protection range class Bending beam load...

Open the catalog to page 7
Cataloque Force sensors | Load cells | Analyzer - 8

Table of contents Tension and commpression load cells Type DBBE / DBBWAS Measuring Protection range class Z-beam load cell / S-beam load cell • Output: 2 mV/V • Accuracy: < ±0.03 % of rated load • High performance • Fast and simple installation Universel S-beam load cell • Output: 2 mV/V to 2.7 mV/V • High accuracy: < ±0.03% of rated load • High performance • Fast and simple installation Miniature S-beam load cell / Z-beam load cell 1 kg • Output: 2 mV/V ±0.1 % • Accuracy: < ±0.03 % / fully submerged • Hermetically sealed • Fast and simple installation Compact S-beam load cell Submersible...

Open the catalog to page 8
Cataloque Force sensors | Load cells | Analyzer - 9

messtechnikforce sensors Commpression CCG Annular Load Cell Key Features • • • • • • • • • • • Capacities 0-12.5kN up to 0-540kN Low Profile Very Compact Low Deflection Output 1.5mV/V nominal Accuracy <±1.5%/RC typical (improved accuracy versions available) Suitable for use with Metric and Imperial Bolt Sizes Sealed to IP66 Robust Construction Custom-Sized Versions Available 3 Year Warranty For the measurement of compressive forces The CCG Series of annular load cells are designed for the measurement of compressive forces, both continually and periodically, and are often used in critical...

Open the catalog to page 9
Cataloque Force sensors | Load cells | Analyzer - 10

Specification Rated Capacity (RC) Operating Modes Compression Only Sensitivity Range 1.5mV/V nominal (see note below) Zero Balance/Offset ±%/Rated Output ±%/Rated Output ±%/Rated Output ±%/Rated Output <±1% for identical mounting position, <±10% for altered mounting position (see note below) Temperature Effect on Zero on Sensitivity ±%/Rated Output/˚C ±%/Rated Output/˚C Input Resistance Ohms (nominal) Output Resistance Ohms (nominal) Insulation Resistance Excitation Voltage Operating Temperature Range Compensated Temperature Range Storage Temperature Range Safe Overload Ultimate Overload...

Open the catalog to page 10
Cataloque Force sensors | Load cells | Analyzer - 11

Resonant Frequency (kHz) @ zero load Ordering Codes Core Product Capacity (inc Engineering Units) Specials Code Example Result 11 messtechnik gmbh messtechnik gmbh germany germany

Open the catalog to page 11
Cataloque Force sensors | Load cells | Analyzer - 13

messtechnikforce sensors Commpression CDF Subminiature Button Load Cell Key Features • • • • • • • • Capacities 500N to 2000N Sealed to IP65 Only 15mm in Diameter and 8mm in Height Integral Load Button Output 1.5mV/V nominal Accuracy <±0.5%/RC Robust Construction 3 Year Warranty For the measurement of compressive forces when space is limited. The CDF subminiature button load cells are designed for the measurement of compressive forces where space is a limiting factor. Its compact size means it can be fitted in the smallest of spaces and is often retrofitted. It is suited for both force...

Open the catalog to page 13
Cataloque Force sensors | Load cells | Analyzer - 14

Specification Rated Capacity (RC) Operating Modes Compression Only Zero Balance/Offset ±%/Rated Output ±%/Rated Output %/Rated Output %/Rated Output Temperature Effect on Zero Temperature Effect on Sensitivity Input Resistance Output Resistance Insulation Resistance Excitation Voltage Operating Temperature Range Compensated Temperature Range Storage Temperature Range Safe Overload Ultimate Overload Deflection @ Rated Capacity Fundamental Resonant Frequency* IP Rating (Environmental Protection) Weight Fatigue Life 10⁸ cycles typical (10⁹ cycles on fatigue-rated version) Cable Length (as...

Open the catalog to page 14

All ETH-messtechnik gmbh catalogs and technical brochures