1. Catalogs
  2. Eternalsun Spire
  3. Spi-Glass Washer 1500

Spi-Glass Washer 1500

Spi-Glass Washer 1500

Spi-Glass Washer 1500

Product catalog summary
Overview: The Spi-Glass Washer™ 1500 is a three-stage machine designed for washing, rinsing, and drying flat glass, preparing it for lamination, inspection, or other production operations. It features non-marking rubber-coated rollers to prevent damage to the glass.
Specifications:
  • Electricity: 220 V, 115 A, 50/60 Hz, 3 Ph (other voltages available)
  • Water Pressure: Minimum 207 kPa (30 psi)
  • Water Flow: Maximum 28 lpm (7 gpm)
  • Water Connection: 0.75 in. NPT
  • Drain Connection: 1.5 in. NPT
  • Glass Dimensions: Minimum Length: 292 mm (11.5 in.), Maximum Width: 1,520 mm (60 in.), Glass Thickness: 1.5 to 6.3 mm (0.062 to 0.25 in.)
  • Equipment Dimensions: Length: 3,990 mm (157 in.), Width: 2,440 mm (96 in.), Height: 2,510 mm (99 in.)
  • Conveyor Height: 840 mm (33 in.)
  • Conveyor Speed: 2.7 to 7.3 m/min. (9 to 24 ft/min.)
  • Shipping Weight: 3,400 kg (7,500 lbs.)
Features and Benefits:
  • Detergent Scrubbing: Utilizes recirculating hot water and detergent solution with top and bottom brushes.
  • Two-Cycle Rinsing: Employs clean plant water rinse with four brushes and spray nozzle manifolds.
  • Drying: High-pressure blower feeds custom-designed air knives.
  • Additional Features: Automatic water off switch, re-circulating rinse water conservation system, stainless steel splash guards, sound reduction system, manual hydraulic lift for maintenance, automatic drain, water feed, and pre-heater water staging.
See more

Catalog excerpts

Spi-Glass Washer 1500-1

Spi-Glass Washer™ 1500 Photovoltaic Glass Washer he Spi-Glass Washer™ 1500 washes, rinses, and dries flat glass in preparation for lamination, inspection, or other production operations. The 3-stage machine washes, rinses, and dries the glass as it moves over non-marking rubber coated rollers. Rotating top and bottom wash brushes gently clean the glass while the pumping system sprays a hot water and detergent solution. The system consists of a detergent tank, pump, immersion heater, thermostat, and spray manifolds. The two cycle rinse, each with a pair of rotating brushes, uses fresh plant water from the factory water supply which in turn is directed through the factory drain. The dryer consists of a centrifugal blower that delivers high velocity air through flexible tubing to four air knives. Replaceable air filters purify the blower air on intake. The conveyor carries the glass sheets through the stages on rubber coated rollers to safeguard the glass from marks and scratches. Washes, rinses, and dries flat glass in preparation for lamination Detergent Scrubbing – Recirculating hot water and detergent solution with top and bottom brushes Two-Cycle Rinsing – Clean plant water rinse with four brushes and spray nozzle manifolds Drying – High pressure blower feeding custom designed air knives Automatic water off switch Re-circulating rinse water conservation system Flexible Operation Stainless steel splash guards, collection pans, and tank Sound reduction system Manual hydraulic lift for maintenance Automatic drain, water feed and pre-heater water staging w w w.spiresolar.com ©2014 Spire Corporation. Tous droits réservés. Spécifications sont sujets à changement sans préavis.

 Open the catalog to page 1
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.