Spi-Frame Press™ 4600 Aligns frame pieces and applies proper force to ensure accurate frame assembly he Spi-Frame Press™ 4600 provides a photovoltaic production frame with the capability to install edge sealant and frames on module laminates. The frame perimeter consists of four frame members and four corner keys that are pressed together using joystick hydraulic controls. The frame provides the means for mounting the laminated solar cells and protects the glass edges from the hazards of the environment. Throughput of 15 modules per hour The laminate rests on a rotating vacuum table that allows an operator to apply sealant, such as foam tape or silicone, to the module edges without changing position. The table rotates 360° and a pneumatically controlled brake locks the rotation when sealant is applied to each side of the module. A venturi vacuum pump provides vacuum to four large vacuum cups to clamp the module securely to the rotating table during sealing. The table lifts up for sealing and lowers for pressing. The vacuum turns off for pressing to allow free movement of the laminate and frame. Compressed air provides power for the table lift, the table brake, and the venturi vacuum pump. A hydraulic pump and two self-aligning cylinders press the frame between a push bar and a rigid back stop. Aligns frame piece and ensures proper frame assembly Rotary table for edge sealing application Vacuum system that holds modules securely in place Corner key press, crimping tool, and tape dispenser Rugged design Prevents mishandling of module while framing Hydraulic pump and cylinders for pressing corner keys into frames Hard plastic surfaces prevent damage to the frame and laminate w w w.spiresolar.com ©2014 Spire Corporation. All rights reserved. Specifications are subject to change without notice.

Spi-Frame Press 4600 Specifications Module Dimension Capability Module Throughput Equipment Dimensions Equipment Net Weight Utility Requirements Frame Press with rotary vacuum table