Manual QA Test Equipment The Manual QA Test Equipment is provided to assure quality of product after assembler operation and lamination process. The equipment is used to perform pull strength testing of the ribbons soldered to the solar cells. Lamination quality is evaluated by doing gel tests to measure the EVA cure level, and peel tests to measure encapsulant adhesion to glass and backsheet. Digital force gauge, with 5 kg (10 lbs) range, 5 g (0.01 lb) resolution Digital balance for weighing EVA gel samples 200 g (0.44 lbs) capacity, 0.01 g resolution Ceramic top hot plate Beakers for processing EVA gel samples Digital thermometer and Type-K thermocouple probe w w w.spiresolar.com ©2014 Spire Corporation. Tous droits réservés. Spécifications sont sujetsto changement sans préavis. All rights reserved. Specifications are subject à change without notice. ©2010

Manual QA Test Equipment Specifications Equipment Dimensions Utility Requirements Compressed Dry Air (CDA) per ISO 8573.1 N/A - various items 110/230 V, 20/10 A, 50/60 Hz, 1 Ph None Required