Manual Junction Box Station

Product catalog summary

Overview: The document describes the Manual Junction Box Station, a tool designed for the installation and attachment of junction boxes to module laminate back surfaces. It includes features that facilitate the positioning and attachment of bus ribbons and diodes.

Features and Benefits: The station includes a ball table with a laminated surface for easy movement of modules, pneumatic pop-up pads to securely hold modules during installation, a caulking gun for dispensing silicone adhesive, and a soldering iron with wide tips for soldering bus interconnects if needed.

Specifications: The equipment dimensions are 2,030 mm x 1,370 mm x 910 mm (80 in. x 54 in. x 36 in.). It requires compressed dry air (CDA) per ISO 8573.1 with utility requirements of 550 kPa (80 psi) and 5 lpm (0.18 scfm). The power requirements are 110/230 V, 15/10 A, 50/60 Hz, 1 Ph.

Utility Requirements: The station operates with compressed dry air and adheres to ISO 8573.1 standards.

Catalog excerpts

Manual Junction Box Station The Manual Junction Box Station includes a ball table and tools to allow convenient positioning and attachment of a junction box to a module laminate back surface. Convenient positioning and attachment of bus ribbons and diodes in the tabs to the junction box is also included. Ball table with laminated surface to easily move modules Pneumatic pop-up pads hold module securely during installation operation Caulking gun to dispense silicone adhesive for attaching and sealing the junction box to the module Soldering iron with wide tips for soldering bus interconnects to J-box if required w w w.spiresolar.com ©2014 Spire Corporation. All rights reserved. Specifications are subject to change without notice.

Open the catalog to page 1