HYPALON SA

HYPALON SA

Product catalog summary
Specifications:
  • HYPALON SA Boots feature a safety toe cap and anti-perforation mid-sole.
  • They offer excellent resistance to corrosive chemicals, particularly concentrated and hot acids, fuels, and solvents.
  • They are highly resistant to abrasion and cuts, suitable for use in hostile environments.
Compliance and Standards:
  • Comply with EN ISO 20345:2022 standards, including S5S* HRO FO CR LG SR.
  • Features include heel energy absorption, antistatic properties, and perforation resistance.
  • Contact heat resistance (HRO) and fuel oil resistance (FO) are also included.
  • Cut resistance (CR) and sole design for ladder use (LG) are specified.
  • Sole slip resistance is assessed on ceramic floors with sodium lauryl sulfate and glycerin (SR).
  • Comply with EN 13832-3 for protection against prolonged chemical contact, including methanol, sulfuric acid 96%, and sodium hypochlorite 13%.
Limitations:
  • The "S" marking does not apply to sizes 3 and 4.5.
  • EN 13832-3 compliance is based on tests from the 2022 version of EN ISO 20345 instead of the 2011 version.
Materials and Design:
  • Made of steel for sizes 3 and 4.5.
  • Features a polymer toe cap and composite anti-perforation mid-sole.
  • Microfiber lining is OEKO TEX certified.
  • Elastomer used is CSM (Hypalon).
Sizes and Weight:
  • Available in sizes FR 36 to 50 and UK 3 to 14.
  • Outside height for size 8 is 370 mm, and weight is 2200g per pair.
Color:
  • Available in grey.
See more

Catalog excerpts

HYPALON SA-1

Composite anti-perforation midsole*** Microfiber lining OEKO TEX Outside height for size 8: 370 mm Weight for size 8: 2200g / pair Elastomer: CSM (Hypalon ****) Reference: HYPALON SA Boots (safety toe cap + antiperforation mid-sole) Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents. Excellent resistance to abrasion and cuts. For use with protective clothing in hostile environments. • Heel energy absorption. Antistatic. Perforation resistant insert (S5) • Sole perforation resistance to 0 3 mm nail (S)* • Contact heat resistance (HRO) • Sole design and cleats for ladders (LG) • Sole slip resistance assessed on : ■ Ceramic floor with sodium lauryl sulfate. ■ Ceramic floor with glycerin (SR). Footwear protecting against a prolonged contact with chemicals : * "S" marking does not apply to the sizes 3 and 4.5 ** Complying with EN 13832-3 : 2018 except for tests performed according to 2022 version of EN iSO 20345 instead of 2011 version. *** Made of steel for the sizes 3 and 4.5 **** DuPont Performance Elastomer patented www.etchesecurite.com | ZA Ordokia - 64130 VIODOS - ABENSE de BAS - FRANCE | +33 (0)5 59 28 05 41 AFNOR CERTIFICATION

 Open the catalog to page 1

All ETCHE SECURITE catalogs and technical brochures

  1. DIELECTRIC SA

    2  Pages

  2. SECUREX SA

    2  Pages

  3. NRBC/CBRN SA

    2  Pages

  4. HYPALON SA

    2  Pages

  5. NEOPRENE SA

    2  Pages

  6. FIREMAN SABJ

    1  Page

  7. VITON SA

    1  Page

  8. CLARK Boots

    1  Page

  9. NRBC Boots

    1  Page

  10. MIC CHIMIE SA

    2  Pages

  11. MIC CHIMIE NS

    2  Pages

  12. MIC CANYON

    1  Page

  13. MODULE D

    3  Pages

  14. DIELECTRIC SA

    2  Pages

  15. DIELECTRIC E1

    2  Pages

  16. DIELECTRIC 1

    2  Pages

  17. FIREMAN

    2  Pages

  18. FIREMAN SA

    2  Pages

  19. CHIMIE SA

    2  Pages

  20. NEOPRENE SA

    1  Page

  21. PDF catalogue

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.