*mydirectindustry

eOne BASIC

Product catalog summary

Supplied Components: The PVDF installation kit includes a PVDF Injection Valve, Foot Filter, 2 meters each of Suction PVC and discharge PE tubing, and a Wall mounting bracket with screws and plugs.

Product Overview: The eOne BASIC is an analogue electromagnetic dosing pump designed for constant flow applications. It features manual flow rate adjustment via a knob with dual scale settings (0-20% and 0-100%), and a proportional mode of 1:1 using a water-meter pulse-sender signal. It supports a multi-tension power supply of 100 to 250 Vac at 50/60Hz.

Material and Construction: The pump head is constructed from PVDF, a highly resistant polymer, with all sealings made from TFE/P, a new elastomer compatible with various chemicals. It includes a manual air bleed pump head and a PTFE diaphragm. The external casing is made from reinforced PP, offering chemical resistance.

Technical Specifications: The eOne BASIC models include:

Model 0210: Flow rate of 2 to 6.1 l/h, maximum pressure of 10 bar, injection volume of 0.18 to 0.56 CC, and a stroke rate of up to 180 impulses/min. Connections are 4x6 mm, with power consumption at 32 W.
Model 0507: Flow rate of 5 to 10.4 l/h, maximum pressure of 7 bar, injection volume of 0.46 to 0.95 CC, and a stroke rate of up to 180 impulses/min. Connections are 4x6 mm, with power consumption at 32 W.

Key Features: The pump includes a level probe input, and its flow rate ranges from 2 to 5 l/h with a maximum pressure of up to 7 bar. The stroke rate can reach up to 180 impulses per minute.

Catalog excerpts

eOne BASIC Analogue electromagnetic dosing pump with constant flow General Features Manual flow rate adjustment by a knob Dual scale adjustment: 0 – 20% and 0 – 100%. Proportional mode 1:1 by water-meter pulse-sender signal Multi-tension Power supply: 100 and 250 Vac 50/60Hz Pump head made of PVDF, polymer highly resistant, with all sealings in TFE/P, which is a new elastomer compatible with a wide variety of chemicals Manual air bleed pump head Diaphragm: PTFE Level probe input Flow rate: from 2 to 5 l/h Maximum pressure: up to 7 bar Stroke rate: up to 180 impulses/min External casing: Reinforced PP and chemical resistant Supplied with PVDF installation kit: PVDF Injection Valve, Foot Filter, 2 m each of Suction PVC/discharge PE tubing, Wall mounting bracket, with screws & plugs

Open the catalog to page 1