Protective Device Coordination & Selectivity brochure
10Pages

Star - Device Coordination ARTTS - Relay Testing & Simulation Protective Device Coordination / Selectivity Sequence-of-Operation Relay Testing & Simulation Relay Test Set Interface & Equipment integrated intuitive intelligent etap.com | 17 Goodyear, Suite 100 | Irvine, CA 92618 | T 800.477.ETAP | T 949.462.0100 | F 949.462.0200 | info@etap.com © 2008 Operation Technology, Inc. All rights reserved. Certain names and/or logos used in this document may constitute trademarks, service marks, or trade names of Operation Technology, Inc. Other brand and product names are trademarks of their respective holders. ISO 9001:2000 10 CFR 50 Appendix B 10 CFR 21 ANSI/ASME N45.2 ASME NQA-1 ANSI/IEEE 730.1 CAN/CSA-Q396.1.2 ANSI N45.22 Quality Assurance Commitment ETAP is Verified and Validated (V&V) against field results, real system measurements, established programs, and hand calculations to ensure its technical accuracy. Each release of ETAP undergoes a complete V&V process using thousands of test cases for each and every calculation module. ETAP Quality Assurance program is specifically dedicated to meeting the requirements of: Operation Technology, Inc.

Ground Grid Systems Finite Element Method IEEE 80 & 665 Methods Transmission Line Line Constants Line Ampacity Sag & Tension HV DC Transmission Link Data Exchange DataX MS Access & Excel CAD Interface e-DPP Interface SmartPlant Interface DC Systems Load Flow Short-Circuit Control System Diagram Battery Discharge Battery Sizing ARTTS Relay Testing & Simulation Relay Test Set Equipment ETAP Test Set Software Cable Systems Underground Thermal Analysis Cable Pulling Cable Ampacity Cable Sizing Star Protective Devices Coordination & Selectivity Sequence-of-Operation Relay Test Set Interface...

Star - Device Coordination / S 4 | electivity | 5 Device Coordination & Selectivity Sequence-of-Operation Verified & Validated Library Relay Test Set Interface Intuitive, Intelligent, Integrated The Most Comprehensive Device Protection & Coordination Analysis Solution ETAP Star device protection and coordination program provides an intuitive and logical approach to Time Current Characteristic (TCC) analysis with features and capabilities such as graphical user interface, true-to-the-form protective devices modeling, extensive Verified & Validated (V&V) device library, embedded analysis...

Star - Device Coordination / S 6 | electivity | 7 One Action Resulting in a Complete Solution Features • Illustrate system wide coordination • Click & drag curves to adjust settings • Automatic current & voltage scaling • Customizable TCC curve layout with embedded one-line diagram • Automatic layout of the one-line diagram in Star TCC View • Integration of short circuit analysis with protective devices • Motor starting curves based on motor acceleration studies • Integration of arc flash analysis results on Star TCC View • Multi-axis time current curves • Automated color sequencing of...

Star - Device Coordination / S 8 | electivity | 9 TCC and Arc Flash Results Generator Decrement Curve Motor Starting / Damage Curve Device Setting Report: Customize reports and export to Microsoft® Excel Fully Integrated Module Integration of Arc Flash Analysis & Star View ETAP Arc Flash is a fully integrated module that takes advantage of all the capabilities already built into Star. The program calculates the individual arcing current contributions and arc fault clearing time of all the protective devices involved in the arc fault by interfacing with Star. The calculated and allowable...

Star - Device Coordination / S 10 | electivity | 11 Sequence-of-Operation Graphical Animation of Protective Device Operation Coordinate via One-Line Diagram • Graphically place a fault anywhere on the one-line diagram • Automatically calculate & display the fault current contributions on the one-line diagram • Evaluate the operating time & state of devices based on the actual fault current contribution flowing through each individual device • Graphical animation of protective device operation • Globally view post fault actions & associated operating time via a tabulated event viewer •...

Star - Device Coordination / S 12 | electivity | 13 Verified & Validated Device Libraries Accuracy and Reliability ETAP is the only high-impact electrical engineering software to comply with widely accepted and firmly established quality standards and regulations. Every release of ETAP is verified and validated (V&V) against field results, real system measurements, established programs, and hand calculations in order to ensure its technical accuracy. The V&V process includes the entire ETAP Library including the device libraries. Library Checker The checker access level is provided for...

ARTTS - Relay T 14 | esting & Simulation | 15 Relay Test Set Equipment Relay Test Set Software Test, Simulate, & Calibrate Relays, Meters, & Transducers Manual & Fully Automatic Testing ‘Click & Test’ Feature for Quick Testing Playback Transients from Fault Studies & Recorders Export to Comtrade Format Precise, Flexible, Accurate Fully Integrated Hardware & Software Relay Testing Solution The ETAP Advanced Relay Testing and Transient Simulator (ARTTS) is a new concept that utilizes hardware and software technologies for testing, calibrating, and simulating relays. ETAP ARTTS combines the...

ARTTS - Relay T 16 | esting & Simulation | 17 Relay Actual Response ARTTS Software Modules Steady-State Response ETAP Star exports the relay settings and parameters to ARTTS for current injection into the relay. Based on the required range of the overcurrent and/or fault current, the relay test set then injects multiple currents (single-phase or three-phase) into the relay in order to reconstruct the relay TCC curve based on the actual relay response. The relay test points are then imported to ETAP Star for plotting and comparison with the manufacturer published data. Transient Response The...