MODEL 195Ep

MODEL 195Ep

MODEL 195Ep

Product catalog summary
Overview
The ESTeem Model 195Ep is a wireless modem designed for industrial, public safety, and federal markets. It features two Ethernet ports and one independent Serial RS-232C data port, providing wireless networking with an RF data rate of 1 to 54 Mbps over a range of 5 to 10+ miles, depending on the antenna used. The device supports control, video, and VoIP applications on a single radio channel and includes a Self-Healing MESH feature for large geographical areas.

Cost Reduction Features
  • Outdoor case design with NEMA 4 weatherproofing allows for indoor or outdoor pole mounting, eliminating enclosure costs.
  • Direct pole mounting reduces RF feed line costs and signal losses.
  • Simple installation process lowers installation costs.

Software Features
  • High-security AES Encryption (128-bit AES-CCMP) compatible with IEEE 802.11i and WPA-2.
  • SNMP support for network diagnostics and management.
  • Rapid Spanning Tree Protocol (RSTP) for faster recovery in mesh networks.
  • Support for VLAN pass-through and IGMP Snooping for enhanced network functionality.

Technical Specifications
  • Frequency of Operation: 4.960 to 4.980 GHz (2-channels).
  • RF Data Rate: 1 to 54 Mbps (12 steps).
  • Tx Output Power: 250 to 2000 mW (4 levels).
  • Rx Sensitivity: -92 to -68 dBm.
  • Power Requirements: Receive 320 ma @ 12 VDC, Transmit 1500 ma @ 12 VDC.
  • Temperature Range: -30° to +60° C, Humidity: 95% Non-condensing.
  • Dimensions: 1.9 in. H x 6.7 in. W x 6.2 in. L, Weight: 1.25 lbs.

Modes of Operation
  • Ethernet Bridge Mode, Point-to-Point, Point-to-Multipoint.
  • Access Point (AP), AP/Bridge, Router, Masquerade.
  • Client Modes for mobile applications.

Security Features
  • AES Encryption (CCMP), 128/64 Bit WEP Encryption.
  • Access Control List (ACL), Temporal Key Integrity Protocol (TKIP).

Additional Information
  • FCC Type Acceptance: ENPESTEEM195EP, Industry Canada Type Acceptance: 1457A-195EP.
  • Optional accessories include outdoor pole mount kit, PoE power supply, and external DC input power connector.
See more

Catalog excerpts

MODEL 195Ep-1

PRODUCT SHEET MODEL 195Ep Frequency • MESHing Self Healing Network Architecture • 5 to 10+ Mile Nominal Range • Industrial Hardened Case • Direct Outdoor Pole Mountable • Extended Temperature Specifications • Power over Ethernet Cable (PoE) • Dual Ethernet Ports • Serial RS-232 Communications Port • Ethernet Bridge Mode • All Bridges can be Repeaters Available in all Access Point and Bridging Modes AP/Bridge, Router and Masquerade • Client Modes (Mobile) • Station Router • Station Masquerade • Access Control List (ACL) • Temporal Key Integrity Protocol (TKIP) Wireless High Speed Ethernet and Serial Ports The ESTeem Model 195Ep is designed for the rigors of the Industrial, Public Safety, and Federal markets, is the next generation wireless modem with two Ethernet ports and one independent Serial RS-232C data port. The Model 195Ep provides wireless networking with an RF data rate of 1 to 54 Mbps, at a nominal 5 to 10+ mile range depending on the antenna used. Now you have greater bandwidth for all your control, video, and VoIP needs, on one radio channel. Wireless networks over large geographical areas become a reality using the 195Ep Access Point Mode with the Self-Healing MESH feature. 195Ep products have a Client Mode so it can be used in mobile applications under a 195Ep radio canopy. • Outdoor case design. The new NEMA 4 case design and weatherproofing kit allows the unit to be indoor or outdoor pole mounted in harsh environments. This feature eliminates the enclosure costs needed with other radios. • Eliminates costly RF feed lines. Direct pole mounting eliminates feedline cost and high signal losses. • Lower installation costs. Simple pole mounting saves installation time and expense. • High Security AES Encryption. The 195Ep uses the high-security 128-bit AES-CCMP compatible with both IEEE 802.11 i and WPA-2 encryption. This level of security is required in most municipal, public safety and federal applications. • Simple Network Management Protocol (SNMP). SNMP open protocol support is standard in the 195E Series that is used for critical network diagnostics and management. • Rapid Spanning Tree Protocol (RSTP - IEEE 802.1d). The Rapid Spanning Tree Protocol will allow faster recovery times in the ESTeem Mesh networks. • Enhanced Network Operation. The 195E Series includes support for VLAN passthrough and IGMP Snooping to support en

 Open the catalog to page 1
MODEL 195Ep-2

Technical Specifications ESTeem 195Ep Specifications Model 195Ep External Antennaw/Serial Port and Surge Protection Only single Ethernet connection shown in diagrams. ELECTRONIC SYSTEMS TECHNOLOGY,415 North Quay Street • Kennewick, WA 99336 Phone (509) 735-9092 • Fax (509) 783-5475Specifications subject to change without notice www.esteem.com Revised: 13 April 2012

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.