*mydirectindustry

Catalogs
Essentra Components
SR 1068 Centre Pull Plugs

SR 1068 Centre Pull Plugs

Product catalog summary

General Properties
Density of LDPE/LLDPE ranges from 0.91 to 0.94 g/cm³ at 23°C.

Thermal Properties
The Vicat softening point is between 70°C and 110°C. The material exhibits low temperature brittleness between -20°C and -70°C. The service temperature ranges from a minimum of -30°C to a maximum of 50°C for continuous use and 60°C for intermittent use.

Mechanical Properties
Tensile strength at break is between 5 and 20 MPa, with elongation at break ranging from 50% to 650%. The 1% secant modulus is between 90 and 300 MPa.

Flammability Properties
The oxygen index is between 15 and 17, with a flammability rating of UL 94 HB.

Chemical Properties
Resistance to weak acids is fair, while resistance to strong acids is fair except for oxidizing acids. The material shows good resistance to both weak and strong alkalis. It is resistant to organic solvents below 60°C but can be attacked by some oils and greases. UV resistance is poor if unprotected.

Contact Information
Moss Plastic Parts Ltd, Langford Lane, Kidlington, Oxon, OX5 1HX. Authorized by F.Browne, Technical Quality Engineer. Tel: +(44)(0) 1865 84 11 00, Fax: +(44)(0) 1865 37 01 35. Document issued on 24/1/2000.

Catalog excerpts

ISOUNITCONDITIONSRESULTSGENERAL PROPERTIES Density1183g/cm323C0.91 Ж 0.94 THERMAL PROPERTIES Vicat softening point306C70 Ж 110Low Temperature Brittleness812C-20 - -70Service temperatureMinimumаC-30Maximum (continuous/intermittent)C50 / 60 MECHANICAL PROPERTIES Tensile strength at break527MPa5 Ж 20Elongation at break527%50 6501% secant modulus527MPa90 ֖ 300 FLAMMABILITY PROPERTIES Oxygen index458915- 17Flammability ratingUL 94HB CHEMICAL PROPERTIES Resistance to Weak AcidsFairResistance to Strong AcidsFair except forOxidizing AcidsResistance to Weak Alkalis / Strong AlkalisGood / GoodResistance to Organic SolventsGood below 60CResistance to Oils and GreasesAttacked by some Resistance to UV Bad if unprotected > TDS.DocMoss Plastic Parts Ltd,Issue: 01Langford Lane, Kidlington, Authorized:F.BrowneOxon, OX5 1HX.Technical Quality EngineerTel: +(44)(0) 1865 84 11 00Date: 24/1/2000Fax: +(44)(0) 1865 37 01 35 size="-1">

Open the catalog to page 1

All Essentra Components catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list