Faster Temperature (& Humidity) Chambers
12Pages

Stress of 5Ž/min. or more achieved with the large-capacity 1800L models. A faster temperature and humidity chamber with 1800 L capacity has been developed for reliability testing of increasingly large display devices to be used in automotive components, in car electronics systems, and more. This marks the arrival of a long-awaited large-capacity temperature and humidity chamber capable of providing a temperature change rate of 5Ž/min. or more. The chamber is packed with numerous features, including a shorter time of delivery, thanks to its standardized component units. Lower power...

‚R Utility Application of high stress of 5 /min. or more now possible This faster temperature (& humidity) chamber enables the application of high stress to the specimen at a steep temperature change rate of 5Ž/min. or more. A temperature change rate of 5Ž /min. or more has been achieved from |45ŽÌ{155Ž with models SMG and SMS, and from |18ŽÌ{158Ž with models SML and SMU (without specimens loaded), thanks to the larger refrigeration systems in this model series. The device features operation within wide temperature ranges: |70Ž to {180Ž and |40Ž to {180Ž. Power consumption slashed An...

Easy to set specimens For cases in which specimens are set in the chamber using a hand-lift, an insertion section has been provided at the bottom of the device, and the test area has also been lowered, so that large-sized specimens and heavy articles can easily be inserted or withdrawn. Large viewing window for specimen observation A large viewing window measuring 380mm wide by 590mm high has been adopted that allows inspection of the interior of the test area. A lamp installed above the test area allows easy observation of the specimen. New shelves structure (patent pending) Due to the...

‚T Control operation Network System E-PILOT 21 (Optional) E-PILOT 21 is ESPEC's suite of networking tools for communicating between a computer and our environmental testing chambers. It enables the management of chamber operation and test settings from a remote location. Additionally, measurement data and system status can be constantly monitored and recorded on the computer. Instrumentation integrated into the door To minimize the required installation space for the device, the instrumentation section has been integrated into the door. The instrumentation produces indications on a bright,...

TMODEL ‚W .. |Ž^ “ |Ž |Ž^ “ |Ž .. ACCESSORIES œ Cable hole rubber plug (Silicone sponge rubber, ö50mm) 2 œ Shelf support, 18-8 Cr-Ni stainless steel (Class CP) 1 set œ Shelf, 18-8 Cr-Ni stainless steel plate 1 set Load capacity of shelf 50kg œ Cartridge fuse, Class A, 250V For SML, SMS, SMG 200, 380, 400V AC spec 5 220V AC spec 6 For SMU 200, 380, 400V AC spec 4 220V AC spec 5 œ Wet-bulb wick (For SML, SMS) 1 box œ User's Manual 1 copy SAFETY DEVICES œ Leakage breaker for power supply (200 to 380V AC spec.) œ Circuit breaker for power supply (400V AC spec.) œ Circuit breaker for...

OPTIONS Nine relay contacts (time signals) added. (Two contacts standard equipped) Expansion of relay contacts External alarm terminal If the safety device of the chamber activates, the alarm is notified to a distance via the external alarm terminal. Emergency stop switch Stops the chamber immediately. Additional overheat protector To prevent overheating inside the chamber and prevent the specimens from being damaged, an upper temperature limit alarm and overheat protector have been incorporated in the chamber as standard. An additional overheat protector can be installed. Overcool...