Compact Type Thermal Shock Chamber (TSE-11-A)
10Pages

Thermal Shock Chamber TSE 11

ESPEC offers a compact, but highly performant thermal shock chamber ideal for the requirements of test standards with small and low-volume specimen. Equipped with superior temperature recovery performance capable of answering the requirements of severe test specifications, this thermal shock model offers a wide test area in a compact, slim design. *The paperless recorder and additional overheat protector are optional.

Characteristics A high performance compact package to meet severe test requirements. A temperature recovery time of less than 5 minutes is achieved in 2 zones ( 150 and 65 ) without auxiliary cooling By realizing a temperature recovery time of less than 5 minutes for the upstream air in the 2 zones ( 150 and 65 ), we have achieved performance equivalent to that of a large thermal shock chamber without having to use auxiliary cooling by means of liquid carbon dioxide, which was requi red i n previous compact thermal shock chamber. Complies with MIL-STD-883H and other test standards This...

H:KIH lu-ni Control panel touch-screen system Operation and settings simplified by the (instructions displayed on-screen). At-aglance confirmation of test patterns. test area temperatures, temperature cycles, upstream / downstream control, and trend graphs display. • Large 10.9-liter-capacity test area Features a 10.9-liter test area, twice that of our previous model. The volume that can be processed is greatly increased, and a 210 x 297mm printed circuit board can be tested in the horizontal position. J Test area anti-drop mechanism A braking system fitted to the drive mechanism prevents...

Characteristics A whole range of environmentally-friendly features Rear intake and ceiling exhaust Minimum footprint Top view Required footprint (Installation space: 2.88 m2) Unit: mm Reduced power consumption Reduced power consu mption is an important issue for our customers. This compact ther mal shock chamber employs number of measures such as the use of electronic expansion valve to reg ulate the ref r igeration capacit y control. Specifically aimed at energy savings. Material labeling for easy recycling Plastic molded components are labeled and easily detachable to make recycling e a s...

Test standard Exposure temperature Exposure time Number of Test starting High temp. Ambient temp.* Low temp. High/low temp. Ambient temp.* recovery time cycles more than temp within 6 cycles High temp. ■ The above specification tests include only those tests applicable to TSE-11 -A. For further information, please contact us ' Ambient temperature at exposure temperature and exposure time represents the temperature and time when moving from hot chamber to cold chamber

Temp. recovery Clod chamber Hot Test area chamber TSE-11-A 2-zone transition by vertical transfer of specimen Model System High temp. exposure range Low temp. exposure range Temperature uctuation *2 Pre-heat upper limit Temp. heat-up time *3 Temp. pull-down time *3 Pre-cool lower limit 2 zones High temperature exposure: 150 ( 302 ), 30 min. Low temperature exposure: 65 ( 85 ), 30 min. Sensor position: Upstream Specimen: Plastic molded ICs 2 kg Recovery conditions Temp. recovery time within 5 min. Shelf brackets on 2 levels of xed location Heater Construction Test area Refrigeration unit...

SAFETY DEVICES Electrical compartment door switch Hot chamber overheat protection switch Cold chamber overheat protection switch Hot chamber overheat protector (Controller) Cold chamber overheat /overcool protectors (Controller) Test area overheat and overcool protectors (Built-in controller) Test area overheat / overcool protectors Refrigerator high pressure switch Thermal relay for compressor Temperature switch for compressor Temperature switch for air circulator Thermal relay for air circulator Motor inverter Motor reverse prevention relay Hot chamber door switch Cold chamber door switch...

OPTIONS Terminal for recorder Total cycle counter Specimen basket To output temperature values from the test area, hot chamber, cold chamber. Indicates cycle counts. Display range: 1 to 99999999 (with reset function) Equivalent to standard accessory. Material: stainless steel (5 mesh) Specimen power supply control terminal Time signal External alarm terminal (option) Additional overheat protector Additional preventive measures can be taken for excessive temperature rise in the chamber, in addition to the standard equipped overheat protectors. Used to bolt the chamber to the floor. Power...

Head Office 3-5-6, Tenjinbashi, Kita-ku, Osaka 530-8550, Japan Tel : 81-6-6358-4741 Fax : 81-6-6358-5500 ESPEC NORTH AMERICA, INC. Tel : 1-616-896-6100 Fax : 1-616-896-6150 ESPEC EUROPE GmbH Tel : 49-89-1893-9630 Fax : 49-89-1893-96379 ESPEC (CHINA) LIMITED Tel : 852-2620-0830 Fax : 852-2620-0788 ESPEC ENVIRONMENTAL EQUIPMENT (SHANGHAI) CO., LTD. Head Office Tel : 86-21-51036677 Fax : 86-21-63372237 BEIJING Branch Tel : 86-10-64627025 Fax : 86-10-64627036 TIANJIN Branch Tel : 86-22-26210366 Fax : 86-22-26282186 GUANGZHOU Branch Tel : 86-20-83317826 Fax : 86-20-83317825 SHENZHEN Branch Tel :...