*mydirectindustry

SK40.2

Product catalog summary

Introduction
This document provides technical specifications and details for the SK40.2 signal converter by esitron-electronic GmbH. The converter is designed to convert analog signals into SSI (Synchronous Serial Interface) signals with a resolution of 16 bits.

Specifications

Input Signal Types: 0-5V, 0-10V, ±10V, 4-20mA
Output Signal Types: SSI Gray/Binary
Resolution: 16 Bit
Galvanic Insulation: Yes, between input and output

Power Supply

Rated Value: 24 VDC ± 20%
Permissible Range: 12 - 30 VDC
Ripple: < 5%
Consumption: Approximately 0.1 A

Environmental Conditions

Operating Temperature: 0 to +50 °C
Storage Temperature: -20 to +70 °C
Weight: Approximately 0.1 kg
Dimensions: 23x92x90 mm (WxDxH)
Mounting: DIN rail TS 35
Protection Class: IP20

SSI Output

Signal Level: 5V / RS422
Clock Frequency: 100 - 750 kHz
Supply: 5V / 24V
Monoflop Time: 10µs - 15µs

Connector Assignment

Various connectors are assigned for different input and output configurations, including analog inputs and SSI outputs.

Additional Information

All data provided in the brochure are for informational purposes and are subject to change without notice.
Contact Information: esitron-electronic GmbH, Ernst-Zimmermann-Str. 18, D-88045 Friedrichshafen, Tel. +49(0)7541-6000-0, Email: [email protected]

Catalog excerpts

Conversion of analog signals to SSI signals • Input signal 0-5V / 0-10V / +-10V / 4-20mA • Output SSI Gray / Binary • Galvanic insulation between input and output • Resolution 16 Bit Order data SK40.2 Conversion from analog signal to SSI All data in this brochure have an informative character without warranty of characteristics. Changes without previous announcement reserved. esitron-electronic GmbH Ernst-Zimmermann-Str. 18 Tel. +49(0)7541-6000-0 D-88045 Friedrichshafen Fax +49(0)7541-6000-11 Internet: www.esitron.de E-Mail: [email protected]

Open the catalog to page 1

General Ambience temperature: Storage temperature: Weight: Dimensions: Connections: Mounting: Protection class: 0 ... +50 °C -20 ... +70 °C ca. 0,1 kg 23x92x90 (WxDxH mm) Screw type terminal DIN rail TS 35 IP20 SSI output Signal level: Clock frequency: Supply: Monoflop time: Power supply Rated value: Permissible range: Ripple: Wrong polarity prot.: Consumption: Data+ DataClk+ Signal ground Connector assignment Data format and delay time 1,3µs Supply voltage analog section State Reference output Current loop okay ADC settled Analog input Unit adjustment Gray Binary

Open the catalog to page 2

All Esitron-electronic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list