*mydirectindustry

SK30

Product catalog summary

Overview: The SK30 signal converter by esitron-electronic GmbH is designed to convert analog input voltages of +/- 10V DC into clock and direction signals, facilitating the use of stepping motors with servo controllers. It includes an incremental encoder simulation for position feedback.

Specifications:

Power Supply: 24 VDC (range 18-30 VDC), with a current consumption of approximately 100 mA.
Analog Voltage Input: Differential input with a range of +/- 10 V (-12 to +30 V) and an impedance of 27 kOhm.
Digital Input (Stop): 24 VDC.
Output Clock/Direction: 24 V, with a frequency range of 5 kHz to 45 kHz, scalable, and an impedance of 68 Ohm, supporting a maximum current of 20 mA.
Incremental Encoder Output: Provides balanced signals according to RS422, with a maximum of 5 V.
Environmental Conditions: Operates within an ambient temperature range of 0 to 50 °C (32° to 122°F) and can be stored between -20 to +70 °C (-4° to 158°F). Maximum humidity is 90% non-condensing.
Connection: Utilizes screw connections with wire protection.
Compliance: Emission standards EN 50081-2 and interference standards EN 50082-2.
Protection Class: IP20.
Dimensions and Weight: Measures 36 x 90 x 95 mm (WxDxH) and weighs approximately 0.2 kg.

Additional Features: The device is DIN rail mountable and includes additional output for incremental encoder simulation and a stop input. It is capable of converting analog signals to clock and direction signals for stepping motors.

Contact Information: esitron-electronic GmbH, Ernst-Zimmermann-Str. 18, D-88045 Friedrichshafen. Phone: +49(0)7541-6000-0, Fax: +49(0)7541-6000-11, Email: [email protected], Website: www.esitron.de.

Catalog excerpts

Signal converter Conversion of analog signals +/- 10V to clock- and direction signals for stepping motors. • Scalable output frequency • DIN mount rail • Additional output incremental encoder simulation • Additional stop input

Open the catalog to page 1

The signal converter SK30 converts analog input voltages of +/- 10V DC into clock and direction signals. With the use of this converter stepping motors can be used in conjunction of a servo controller. An additional incremental encoder simulation is provided for position feedback signals. Technical Data Power supply: Current consumption: Analog voltage input: Digital input (Stop): Output clock/direction: 24 VDC (18 ... 30 VDC) Ca. 100 mA Differential input +/- 10 V (-12 ... + 30 V) 27 kOhm impedance 24 VDC 24 V 5 kHz ... 45 kHz Maximum frequency (scalable) 68 Ohm impedance 20 mA max. current...

Open the catalog to page 2

All Esitron-electronic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list