Catalog excerpts
Special functions for hydraulic drives MICROPOS MP100Positioning controller for electric or hydraulic drives • Digital position controller • Separate programmable acceleration and deceleration ramps • sin2 acceleration possible • 99 positions in internal memory • Online RS 232 - interface • Selection of operating mode through inputs • Decoded text error diagnosis • 1 ms regulating time • External selection of up to 63 positions • Absolute and relative positioning selectable per set Functions for hydraulic drives: - piston area compensation (parameter) - characteristic curve compensation (parameter) - Overlap compensation (parameter) - Pt1 - regulation (parameter)
Open the catalog to page 1MICROPOS MP 100 The MP 100 is a positioning unit for universal applications featuring simple and comfortable operation. A position and speed control is integrated. The use of latest technology renders the MP100 a very compact device. The fast 16 bit microcontroller stands for high efficiency of the system and enables regulating times faster than 1 ms! Program execution 99 records (power fail safe) - position (absolute/relative) - verlocity - M-function - delay-time (between records) Direct programming at the front panel Programming through serial interface Programming using a digi-switch...
Open the catalog to page 2Programming examples Sinusoidal or linear ramp. Change of speed with or without intermediate stop. Separate acceleration and deceleration times. X1: 300.5 ;Length (mm) V1: 8.0 ;Velocity (m/min) 500 ;Delay time (ms) T1 : X2: 200.3 ;Length (mm) 5.0 ;Velocity (m/min) V2: 0 ;Delay time (ms) T2 : 1 ;M-Funktion 1 set M2: X1: 250.5 ;Length (mm) V1: 8.0 ;Velocity (m/min) 0 ;Delay time (ms) T1 : X2: 240.3 ;Length (mm) V2: 5.0 ;Velocity (m/min) 0 ;Delay time (ms) T2 : 1 ;M-Funktion 1 set M2: Connecting diagram + UB 24 V (0,3 A) Release Start Record select. S1 S2 " S4 " S8 " S16 " Ready / fault In...
Open the catalog to page 3Modes of operation: Reference run Jog forward/backward/fast Automatic Single/Cycle Program input: 99 records, power fail safe through non volatile EEPROM. In each set: - absolute or relative position (-9999.999 ... +9999.999) i.e. mm - velocity (0.01 - 320 m/min) - machine function (set / clear) - delay time ( 0 ... 9999 ms) External record selection: Through RS232: all 99 positions, through digital inputs: up to 31/63 positions selectable (electric/hydraulic drives) Parameter input: Data specific to machine and motor, password protected Tool correction: Signal-inputs: Signal-outputs: Set...
Open the catalog to page 4All Esitron-electronic catalogs and technical brochures
-
Display module DM 6
2 Pages
-
DMD128_E
2 Pages
-
DM100 Prozessanzeige
2 Pages
-
SK20
2 Pages
-
ServoController SC8
4 Pages
-
PGB040 ... 155
4 Pages
-
SK40.2
2 Pages
-
Position display AM 10
2 Pages
-
SK30
2 Pages
-
FRT 28 / 40 / 50 / 60
6 Pages
-
PGA52/PGA60
2 Pages
-
APS -System
4 Pages
-
Large Display module DM 57
2 Pages
-
DM100 series
2 Pages
-
SBL series
6 Pages
-
Drive Technology:ESY series
26 Pages
-
Signal converter SK 30
2 Pages
-
Cam Controller DNS 20
2 Pages
-
Cam Controller CC 8 / CC16
2 Pages