Position display AM 10

Product catalog summary

Overview: The document provides technical specifications and functionalities of the AM10 display module, which is compatible with incremental, SSI, Transsonar, and EnDat 2.2 encoders. It highlights the module's features, connection options, and application examples.

Specifications:

Display: 7 1/2 digit LED display with a 14mm digit height, scalable measurements in mm, inch, liter, and degrees.
Power Supply: Operates on a 10...32 V DC supply voltage.
Dimensions: 144 x 72 x 111 mm with a mounting cut-out of 68 x 138 mm, compliant with DIN 43700 standards.
Outputs: Two programmable relay outputs with a maximum load of 1 A (250 VAC) or 2 A (24 VDC), and four transistor outputs (+24 V, high-side switch).
Inputs: Two multifunction digital inputs for external zero-setting, freeze display, display minimal/maximal value, and enable keyboard.

Functionalities:

Relay Outputs: Can function as limit switches, comparators, cams, or two-position controllers.
Measurement Adjustments: Adjustable number of decimal places, zero point, and counting direction.
Connection Options: Direct or parallel connection to encoders and other equipment like PLC/CNC.

Application Examples:

Level control with range monitoring using analog signal monitoring/control.
Measurement with tolerance monitoring using cam-function outputs.
Direct connection to various measurement systems and interfacing with analogous systems using optional 16 Bit analog output.

Additional Options: The document mentions various accessories and options, including tabletop enclosures with integrated power supply, wall-plug adapters, and RS232-Interface for data output.

Contact Information: Provided for esitron-electronic GmbH, including phone, fax, and email details.

Catalog excerpts

Display module for incremental SSI, Transsonar or EnDat 2.2 - encoders • Wide display range (7 1/2 digits) • Easy legible LED display (red, 14mm digit height) • Scalable measurement (mm, inch, liter degree (decimal or minutes and seconds) • Adjustable number of decimal places • Adjustable zero point and countig direction • 10...32 V DC supply voltage • 2 multifunction digital inputs - alternative functions: - External zero-setting (relatively, absolutely) - Freeze display - Display minimal/maximal value - Enable keyboard • 2 programmable relay outputs, each with a max. load of 1A (250 VAC) or 2 A (24 VDC), possible functions: - Limit switch /comparator - Cam - Two-position-controller EnDat 2.2 • Dimensions and cut-out according to DIN 43700: - Dimensions: 144 x 72 x 111 mm (W xH xD) All data in this brochure have an informative character without warranty of characteristics. Changes without previous announcement reserved. esitron-electronic GmbH Ernst-Zimmermann-Str. 18 Tel. +49 (0)7541-6000-0 D-88045 Friedrichshafen Fax +49 (0)7541-6000-11 Internet: www.esitron.de E-Mail: [email protected]

Open the catalog to page 1

Possible connections: direct or parallel Direct connection Parallel connection to other equipment like AM10 or PLC / CNC Application examples Displayunit with range-limiting function Measurement with tolerance monitoring Outputs with limit-switch function Outputs with cam-function MeasurementSystem Acquisition System Manual operation Outputs "forward" Outputs Level control with range monitoring Interfacing analogous systems Outputs with cam and two-position controller with optional 16 Bit analog output Measurementsystem Encoder Ready/Fault Analog singnal Order data for incremental encoders, for...

Open the catalog to page 2

Position display AM 10

Position display AM 10

Catalog excerpts

All Esitron-electronic catalogs and technical brochures