Universal Cam Controller for linear or • Multiple swichpoints for each cam supported • 300 switchpoints can be distributed over 15 programs • Direction-dependent switchpoints possible • Dynamical dead time compensation for each cam adjustable • TDC or tool/null point correction separat adjustable • Parallel connection of several CC8/CC16 is feasible • Indication of the cam status on front panel LED's • Easy legible LED display (6 digits, red, 14 mm digit height) • Pos. Acquisition: SSI -, transsonar - or incremental sensors • Teach-in programming supported • Integrated sensor supply 5 V or 24 V • Small seated size • Optional serial interface for host programming Ordering data: Cam controller with 8 outputs (Cams) Cam controller with 16 outputs (Cams) for incremental measurement system for absolute SSI measurement system for transsonar measurement system esitron-electronic GmbH Internet: www.esitron.de E-Mail: [email protected]

The CC8/CC16 are modern programmable cam controllers for linear or rotary applications. Due to their fast cycle time of 1ms the CC8/CC16 are ideal for fast running machines. All common position feedback systems are supported. A large LED display and numeric keyboard provide quick and simple operation. Passwords and an input for a key switch assure protection against use by unauthorized personel. The units are packaged in a compact standard housing for easy panel mount. Rotary example: Linear example: Digital inputs: Supply voltage: Sensor supply: LED 7-Segment display, 6 red digits, 14 mm height...