1100 L SPLIT LID
8Pages

{{requestButtons}}

Catalog excerpts

1100 L SPLIT LID - 1

4-WHEEL WASTE AND RECYCLABLES CONTAINERS 1100 L SPLIT LID BE CLEVER BE FLEXIBLE!

Open the catalog to page 1
1100 L SPLIT LID - 2

The number of 1100 litre waste and recyclables containers in the municipal and public domain has increased substantially in recent years. There are 2 types: bins with sliding or round lids and bins with flat lids. Under certain conditions, flat-lid bins can encounter problems with rotatingdrum vehicles because of their long, wide lids. In a few cases, collisions can even occur between lids and waste residues in the tipping zone or with compactor plates. Such contact problems do not usually arise with round-lid bins, but these are more costly and maintenance-intensive than flat-lid bins....

Open the catalog to page 2
1100 L SPLIT LID - 3

UNBEATABLY PRACTICAL The result is worth looking at! The Split Lid combines safety, ease of handling and economy, and is an interesting alternative to bins with round lids. The integral bow-type handle in the middle of the front lid combined with a lip handle all round the edge is a unique solution. The front lid can be opened 150° and remains in that position during filling. The base lid section of the split lid can easily be opened completely using the bow-type handles at the sides. From neutral position, the front lid can also swing downwards, so that it can yield to any contact zones in...

Open the catalog to page 3
1100 L SPLIT LID - 4

DOUBLE ADVANTAGE BE CLEVER, BE FLEXIBLE! In practical use, the lids of 1100 litre containers frequently collide with the compression mechanism of collection vehicles. Residual waste in the hopper can also come into contact with lids. The consequence is often damage to lids and hinges. The Split Lid, with its flexible front element which can hinge in either direction, is at a significant advantage here: it simply gives way, in either direction! Fracture of the lid or damage to the body hinge is practically impossible. All in all, it significantly reduces the risk of accidents due to damaged...

Open the catalog to page 4
1100 L SPLIT LID - 5

INTELLIGENT COLOUR CONCEPT All lid components are designed to be easily fitted and replaced. Like the standard flat lid, the whole lid is fitted using the same lid bolts. Thus any ESE 1100-litre flat-lid bin can be retrofitted with the new Split Lid. For changes of fraction, only the front lid of a bin needs to be replaced with a different-coloured one. For this reason, all applicable marking devices are located only on the front lid. This makes storage more efficient, and hence more economical. The ESE Colour Concept is based on a simple equation: less colour = more recycling. This is...

Open the catalog to page 5
1100 L SPLIT LID - 6

ERGONOMICALLY DESIGNED LESS EFFORT The front lid is very light compared to the complete lid. With its central open handgrip in the middle and the additional lip handle all round the edge, it can be opened easily, even by children, the elderly or people with a disability. It can be completely opened without difficulty, so that it can be filled with one hand. This is especially convenient when there are several waste bags to be disposed of. It is not essential to open the whole lid, which house walls often render impossible except by moving the bin. The ergonomic improvements mean that it...

Open the catalog to page 6
1100 L SPLIT LID - 7

COMPREHENSIVE STANDARD – Reinforced body construction, ribbed front and rear walls – Base structure and high stress areas are computer-designed and tested for durability – Lids have a side lip for automatic closing and positioning when on uneven ground, irrespective of ground surface type – Wide symmetrical lifting trunnions with reinforcement tubes – Strong integrated lid bolts – Four ergonomic handles on the side as standard (handles are exchangeable) – DIN comb receiver with honeycomb ribbing – Centrally positioned water drain plug secured against dropping – Reinforced wheel housings –...

Open the catalog to page 7
1100 L SPLIT LID - 8

ESE - WE VALUE YOUR RECYCLABLES KERBSIDE SYSTEMS BRING SYSTEMS (SEMI-) UNDERGROUND SYSTEMS COLLECTION BANKS HAZARDOUS WASTE CONTAINERS MOBILE FUEL CONTAINERS MOBILE OIL CHANGE UNITS PUBLIC FURNISHING BINS FOR THE PUBLIC SPACE CONTAINER MANAGEMENT DISTRIBUTION, REGISTRATION, COLLECTION AND RECYCLING ESE is Europe‘s leading manufacturer of temporary storage solutions for waste and recyclables. Our comprehensive range of products is complemented by a full service offer from container management to the recycling of products at the end of their lifetime. Specialists in all departments develop...

Open the catalog to page 8

All ESE GmbH catalogs and technical brochures

  1. COMPOSTER

    4 Pages