esde Winders For flat profles that can be wound we build one-point winders, turret winders and edge trim winders. One-Point Winders A cost-saving alternative is the one-point winder especially for the production of film rolls with large diameters. Turret Winders with Film Accumulator The turret winder system can be executed as double winder for two film webs and is motorically pivoted. The synchronous servo geared motors are exactly tuned to the mass inertia and can be synchronized to one leading drive. It is possible to wind up the upper side of the film to the inside or the outside. The winder is suitable for film thicknesses from 0.1 to 2.0 mm and a maximal web speed of 40 m/min. Turret Winders with Automatic Cross Cutting Unit As the full roll is rotated into position the „flying knife“ immerges into the film web. The control for the cutting process is coupled to a length counter. The finished film rolls are manually removed. The automatic cut is carried out up to a film thickness of 0.7 mm, thicker films have to be cut by hand. Edge Trim Winders with Traversing System The wind-up shaft is electrically driven. The motor characteristics guarantee the adjustment of the rotational speed for increasing wound diameters. The edge strip is moved to and fro by a traversing conveying system forming a solid roll. The winding up is without core, whereby the maximum outside diameter is 500 mm approximately and the winding width about 250 mm. esde Winding-up Station WW 1200-600 with web conveyor and automatic cross cutting unit esde Single Station Winders ESW 1400 for 2 webs esde Edge-trim Winder RSW 400

Cutting Units For custom-fit dimensioning of sheets we provide our cross-cutting shears. esde Cross Cutting Shears The cutting length pre-selection of the sheets and their number are set on the operating panel of the extruder. The guillotine shears are positioned on a movable base frame and accellerated up to web speed before the cutting process, thus preventing an accumulation of the film web in front of the shears. esde Cross Cutting Shears QS 1500 Make an appointment with us for a trial. Phone: +49 (0)5731 9014 [email protected]