Catalog excerpts
ECX-ECEtherCAT® Slave Bridge 'Bridging two EtherCAT Slave Segments' • Includes two EtherCAT slave devices • Process data exchange between two EtherCAT networks • Time synchronization (DC) between the EtherCAT Masters • Supports DC with redundancy EtherCAT Implementation • Ethernet physics acc. to IEEE 802.3 • Configuration via CoE • Firmware upgradable via FoE • EoE support (Switch port) EtherCAT Process Image widely configurable • Configuration by typical network configuration tools (e.g. esd Workbench, TwinCAT®) • Up to 1024 bytes in each direction • Layout defined by variables, e.g. 'UDINT' EtherCAT Slave Bridge The ECX-EC connects two EtherCAT segments. Therefore the EtherCAT slave bridge implements two seperate EtherCAT slave interfaces for integration into two EtherCAT networks. The bridge allows EtherCAT process data exchange between the networks. For synchronization of Distributed Clocks (DC) it offers the exact difference between the two slave timestamps as CoE object to allow one master adjusting its time to the other. For DC synchronization in the redundancy case the ECX-EC bridge is used as first and last slave simultaneously, which allows the master to keep all slaves synchronized in both segments. EtherCAT A IN 100-BASE-TX RJ45 with LEDs EtherCAT A OUT 100-BASE-TX RJ45 with LEDs EtherCAT B IN 100-BASE-TX RJ45 with LEDs EtherCAT B OUT 100-BASE-TX RJ45 with LEDs Status LEDs EtherCAT Slave Controller ARM® Cortex™ A8 Microprocessor DC/DC Converter Ethernet ETH 100-BASE-TX RJ45 with LEDs InRailBus Connector for CAN-CBX-TBUS Technical Specifications: Microcontroller: General: Flash: 8 MB EtherCAT Slave (primary): Controller CPU internal PRU EtherCAT Slave (secondary): Controller ET1100 Ethernet: Controller CPU internal EMAC Ambient temperature 0 °C ... +55 °C Relative humidity Max. 90 % (non-condensing) Mounting DIN-EN carrier rail mounting Order Information: Hardware Order No. ECX-EC ECX-EC EtherCAT Bridge for top-hat-rail E.3022.02 Interface 1x RJ45, 100BASE-TX, IEEE 802.3 mounting incl. CD with documentation and EtherCAT Workbench Trial Version ©2013 esd electronic system design gmbh, Hannover All data are subject to change without prior notice. EtherCAT®is a registered trademark and p^e^ed technology. I:\Texte\Doku\DBL\EtherCAT\Englisch\ECX\ECX-EC_Datasheet_en_12.odt Al1 other tectemi-te am rnxn/t^ bytheir ^pxdrn own^.
Open the catalog to page 1All Esd electronics gmbh catalogs and technical brochures
-
CPCIserial-CAN/402-4-FD
2 Pages
-
CPCI-CAN/402-4(-FD)
2 Pages
-
CAN Cables and Accessories
2 Pages
-
CAN-USB/400-FD
2 Pages
-
EPPC-T10
2 Pages
-
Switch16/Com3
1 Pages
-
XMC-CPU/Zulu
2 Pages
-
CANopen-PN
1 Pages
-
XMC-CAN/402-4-FD
2 Pages
-
PMC-CAN/402-4-FD
2 Pages
-
CAN-PCIeMini/402-2(-FD)
2 Pages
-
CAN-PCIe/402-FD
2 Pages
-
PMC-CPU/405
1 Pages
-
ECS-PCIe/FPGA
1 Pages
-
CPCIserial-CAN/402
2 Pages
-
CAN-USB/400
2 Pages
-
ECS-XMC/FPGA
1 Pages