ECX-Master-Selector Dual EtherCAT Master Switch for two Redundant Masters EtherCAT Redundant Master Selector • One EtherCAT network with cable redundancy switching between the primary EtherCAT master and the secondary EtherCAT master by a simple switching signal Flexible Application Range • Ethernet physics according to IEEE 802.3 • Compatible for all Ethernet based systems or field bus standards More Than Specified by ETG • The ECX-Master-Selector features the possibility to build up an EtherCAT network with a redundant EtherCAT master system as extension to EtherCAT Technology Group Standard (ETG). EtherCAT-Master-Selector The ECX-Master-Selector is equipped with a LAN selector switch. Triggered by a simple switching input signal, the ECX-MasterSelector can switch an EtherCAT network between two different EtherCAT masters with cable redundancy. The input signal is optically isolated. The power supply can be applied via the In-Rail-bus connector (TBUS-connector) integrated in the mounting rail or separately via the clamp-connection. Mounting/Connection The ECX-Master-Selector is designed for DIN-EN carrier rail mounting. The module provides service-friendly ‘wiring’ of the supply voltage. InRailBus Connector for CAN-CBX-TBUS DC/DC Converter Switching Signal Switching Signal + Switching Signal - Switching Signal Switching Signal and 24 V power connector MSTBO 2,5/4-G1L-KMGY Ethernet 100-BASE-TX e.g. E therCAT Network X200A Cable Redundant EtherCAT Network Bit rate General: Connector Primary and secondary EtherCAT master EtherCAT network InRailBus Connector: Power supply, switching signal ©2013 esd electronic system design gmbh, Hannover All data are subject to change without prior notice. I:\Texte\Doku\DBL\EtherCAT\Englisch\ECX\ECX-Master_Selector_Datasheet_en_12.odt Primary Master Ethernet 100-BASE-TX RJ45 with LEDs e.g. Secondary Master X310A Ethernet 100-BASE-TX e.g. E therCAT Network X200B Technical Specifications: Control: LAN switch TS3L4892/Ti Ethernet Interfaces: Number Cable redundant primary and secondary EtherCAT master, 1x EtherCAT network Physical According to IEEE 802.3 interfaces Ethernet 100-BASE-TX RJ45 with LEDs e.g. Primary Master X300A General (continued): Supply voltage Switching voltage Ethernet 100-BASE-TX RJ45 with LEDs e.g. Primary Master X300B Ethernet 100-BASE-TX RJ45 with LEDs e.g. Secondary Master X310B Secondary Master Ambient temperature Relative humidity Protection class IP20 35 mm x 99 mm x 114.5 mm (dimensions without mating connectors) Dimensions Mounting Weight Order Information: Hardware DIN-EN carrier rail mounting (TS35) 150 g EtherCAT® is a registered trademark and patented technology. All trademarks are reserved by their respective owners. esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover / Germany