• 8 digital I/Os • Inputs 24 V, outputs 24 V/0.5 A The ECX-DIO8 module is equipped with 8 digital I/Os, each available as input and output. The nominal I/O-voltage value is 24 V. Nominal output current is 0.5 A at 24 V. The ECX-DIO8 module provides industrial digital in-/outputs with two-wire connection in combination with service-friendly wiring of supply voltage. The power supply can be applied via the InRailBus connector (TBUS-connector) integrated in the mounting rail or separately via the clamp-connection. The 100BASE-TX EtherCAT interface is compatible to IEEE 802.3. Configuration is done by EtherCAT master (XML file). Process coupling: General: Number of digital 8 channels, each selectable as input and output Supply voltage: nom. 24 VDC / 50 mA LEDs: 8 LEDs reflecting the DIO pin status Operating temperature: -20 °C ... +70 °C Specification of input voltage (nominal value): 24 VDC Humidity: max. 90 % non-condensing the digital inputs: over voltage protectionUp to uv,o_ Dimensions: 22.5 mm x 99 mm x 114 mm Specification of high side power switches, Order infomieiticin' the digital outputs power supply Uvio: nominal 24 VDC, „ . output current (nom.): 0.5 A (70 °C, 24 V), ECX-DIO8 EtherCAT - digital I/O-Module E.3010.02 protection circuit: short circuit and over _with 8 channels_ temperature protection with output shutdown and undervoltage shutdown with auto-restart and hysteresis EtherCAT slave controller (ESC): All data are subject to change without prior notice. EtherCAT® is registered trademark and patented technology. I:\Texte\Doku\DBL\EtherCAT\Englisch\ECX\ECX-DIO8_Datasheet_en_13.odt All trademarks are reserved by their respective owners. E-mail: [email protected] esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover / Germany