• High noise immunity (industry) • Only one slot (4 HP) wide • Passive cooling The CPCI-PS24 is powered with 24V and offers output voltages of 3.3 V and 5 V. The electromagnetic behavior is in compliance with rough industrial environment as well as commercial or home area. The board is designed to fit in CompactPCI rack systems with 3 U height. It is equipped with a standard CPCI front panel. The 24 V input voltage is fed via a connector in the front panel. LEDs display the status of input and outputs. Technical Specifications: Voltages: Input voltage 24 V typical,18 V... 34 V valid voltage range, reverse voltage protection Output voltage 5 V, ±3%, max. 50 W 3.3 V, ±3% , max. 50 W electrically isolated from output SELV/ class III equipment acc. EN 60950 Power consumption max. 120 W General: Electrostatic discharge: 4 kV contact / 8 kV air Burst: 2 kV Electromagnetic field: 10V/m Conducted disturbance: 10V EN 61000-6-3 Emission: class b Connectors input voltage: 3-pole Mini-Combicon output voltage: 5-pole male connector, Order Information: CPCI-PS24 Power supply unit I.2301.05 CiA® and CANopen® ana registered community trademarks of CAN in Automation e. V.. All trademarks are reserved by their respective owners. ©2013 esd electronic system design gmbh, Hannover All data are subject to change without prior notice. I:\Texte\Doku\DBL\CPCI\Englisch\Blue\CPCI-PS24_Datasheet_en_ 12.odt esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover/ Germany E-mail: [email protected]