CAN-USB/400
2Pages

CAN-USB/400 2x CAN (Layer 2, CANopen®, J1939 or ARINC 825) Two High-Speed CAN Interfaces for USB • CAN interfaces according to ISO 11898-2 with electrical isolation • Powered by esd Advanced CAN Core (esdACC) implemented in an FPGA • Capable of 100% CAN bus load Robust and Easy to Handle • Power supply by USB • Aluminium case • Incl. USB cable Advanced Diagnostics and Timestamping • Enhanced diagnostic features • Error injection capabilities • High resolution hardware timestamping • CAN interfaces share common time base Optimized Architecture Attached to USB via FIFO's and driven by esd Advanced CAN Core (esdACC), the CAN-USB/400 is designed for minimum latency CAN communication via USB. Error Injection A feature pretty unique on standard CAN interfaces. Error Injection provides means to simulate error conditions on CAN bus. Bit patterns can be injected into any living CAN bus. Several trigger conditions and modes are provided. Software Support 1 Operating system independent CAN layer 2 API (NTCAN) • Driver Support for Windows • Multiple Higher Level Protocols available for Windows • CANopen Master- and Slave-Stack • J1939 • ARINC825 • Drivers and software support for other operating systems are available on request. Electrical Isolation DSUB9 CiA pinning Physical CAN Layer Digital Isolator CAN 2x CAN Core with Timestamp DC/DC Converter Electrical Isolation DSUB9 CiA pinning Physical CAN Layer Digital Isolator DC/DC Converter Technical Specifications: USB Interface and Microprocessor: Order Information: CAN layer 2 drivers for Windows are included in delivery. 2x high-speed CAN interface acc. to ISO11898-2, bit rate 1 Mbit/s, differential, electrically isolated Software Support CANopen object licences including CD-ROM 1: CANopen-LCD Windows J1939 stack for Windows including CD-ROM 1: J1939-LCD Windows General: Ambient temp. Supply voltage Approximately 86 mm x 19 mm x 86 mm (excl. connector excess length) ARINC 825 object licences including CD-ROM : ARINC825-LCD Windows 1 For detailed information about the driver availability for your operating system please contact our sales team. CAN: 2x DSUB9 (male) USB: series B type (female) CANopen® is a registered Community Trademarks of CAN in Automation e.V.. All other trademarks are reserved by their respective owners. esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover / Germany

CAN-USB/400 Driven by esdACC (Advanced CAN Core) Basic Product Features: • CAN ISO 11898-1 protocol compatibility • 11-bit and 29-bit CAN IDs • Bit rates from 10 kbit/s up to 1 Mbit/s supported • Receive buffer (64 CAN messages ) • Complete access to CAN error counters • Programmable error warning limit • Error code capture register • Error interrupt for each CAN bus error • Arbitration lost interrupt with detailed bit position • Single-shot transmission (no re-transmission) • Listen only mode (no acknowledge, no active error flags) • Automatic bit rate detection (software supported bit...