CAN-USB/400-FD
2Pages

Two High-Speed CAN FD Interfaces for USB • CAN FD interfaces according to ISO 11898-2 with electrical isolation • Powered by ISO 16845:2004 certified esd Advanced CAN Core (esdACC) implemented in an Altera® FPGA • Capable of 100% CAN bus load Robust and Easy to Handle • Power supply by USB • Aluminium case • USB cable included • High retention force USB connector Advanced Diagnostics and Timestamping • Enhanced diagnostic features • Error injection capabilities • High resolution hardware timestamping • CAN interfaces share common time base Customization on Request • Analog and digital IRIG-B inputs Optimized Architecture Attached to USB via FIFO's and driven by esd Advanced CAN Core (esdACC), the CAN-USB/400-FD is designed for minimum latency CAN communication via USB. CAN FD The CAN-USB/400-FD comes with two independent CAN FD interfaces according to ISO 11898-1:2015, which are driven by the ISO 16845:2004 certified esdACC (esd advanced CAN Core) implemented in an Altera® FPGA. The interface is able to send and receive ISO conform CAN FD (up to 5 Mbit) or CAN 2.0 A/B messages. The CAN FD bit rate range is validated for the esdACC CAN FD core from 10 kbit/s up to 5 Mbit/s. Error Injection A feature pretty unique on standard CAN interfaces (Classical CAN application only). Error Injection provides means to simulate error conditions on CAN bus. Bit patterns can be injected into any living CAN bus. Several trigger conditions and modes are provided. Software Support Windows (NTCAN-API) The CAN layer 2 drivers for Windows are included in the scope of delivery. Higher Layer Protocols (Classical CAN application only) Higher Layer Protocols are available for Windows (see order info): • CANopen Master- and Slave-Stack •J1939 • ARINC825 Additional free-of-charge esd CAN tools for Windows are downloadable from our website. The tools offer efficient setup and analysis of CAN applications and networks. Customization on Request Customized options are available for customized series production in reasonable quantities. Please contact our sales team for detailed information. Electrical Isolation with Timestamp Technical Specifications: USB Interface and Microprocessor: USB USB 2.0, high-speed 480 Mbit/s Memory CAN: Interface Order Information: Hardware 2x high-speed CAN FD according to ISO11898-2, bit rates from 10 kbit/s up to 5 Mbit/s (with the same CAN transceiver), electrically isolated CAN controller esdACC in Cyclone IV Altera® FPGA, according to ISO 11898-1:2015 General: Ambient temperature Rel. humidity Max. 90 % (non-condensing) CAN layer 2 drivers for Windows are included in delivery free of charge. Higher CAN layer protocols including CD-ROM for Classical CAN Application: CANopen-LCD Windows C.1101.06 Related Products 1 For detailed information about driver availability for your operating system please contact our sales team. Dimensions Approximately 86 mm x 19 mm x 86 mm (excl. connector excess length) Connectors CAN: 2x DSUB9 (male) USB: series B-type (female), high retention force connector esd electronics gmbh Vahrenwalder Str. 207 30165 Hannover / Germany E-mail: info@

CAN-USB/400-FDDriven by esdACC-FD (Advanced CAN Core) Basic Product Features: • CAN ISO 11898-1:2015 protocol compatibility • Tested and certified acc. to ISO CAN Conformance Tests “ISO 16845:2004 Road vehicles - Controller area network (CAN) - Conformance test plan” • 11-bit and 29-bit CAN IDs • Bit rates from 10 kbit/s up to 5 Mbit/s supported • Receive buffer (64 CAN messages ) • Complete access to CAN error counters • Programmable error warning limit • Error code capture register • Error interrupt for each CAN bus error • Arbitration lost interrupt with detailed bit position • Listen...