CAN-PCIeMini/402-2(-FD)
2Pages

Single Lane PCIe Mini Card with Altera® FPGA for 2x CAN or 2x CAN FD • 2 CAN (FD) interfaces according to ISO 11898-2 • Bus mastering and local data management by FPGA • PCIe® Mini interface according to Mini Card Electromechanical Spec. R1.2 • Supports MSI (Message Signaled Interrupts) • Full-Mini Card (Type F2) form factor Wide Range of OS Support and Advanced CAN Diagnostic • Software drivers for Windows® and Linux® included free of charge • Optional CAN layer 2 software drivers for real-time operating systems • CANopen®, J1939 and ARINC 825 protocol libraries • ISO 16845:2004 certified esd Advanced CAN Core (esdACC) technology • High resolution hardware timestamps Flat Design of CAN Interface Adapter • Adapter with DSUB9 connector and selectable CAN termination on board Customization on Request • Optional extended temperature range -40° C ... +75° C on request Hardware Designs The CAN-PCIeMini/402-2 is an add-in PCI Express Full-Mini Card, that features two electrically isolated CAN High-Speed interfaces. The PCI Express® Mini Card CAN-PCIeMini/402-2-FD comes with two CAN FD interfaces. An optional adapter offers a DSUB9 connector and on board CAN termination. CAN Data Management The independent CAN nets are driven by the ISO 16845:2004 certified esdACC (esd Advanced CAN Core) implemented in the Altera FPGA. The FPGA supports bus mastering (first-party DMA) to transfer data to the host memory. This results in a reduction of overall latency on servicing I/O transactions in particular at higher data rates and a reduced host CPU load. Due to the usage of MSI (Message Signaled Interrupts) the CAN-PCIeMini/402-2(-FD) can be operated for example in Hypervisor environments. The CAN-PCIeMini/402-2(-FD) provides high resolution 64-bit hardware timestamps for CAN messages. Software Support Windows and Linux (NTCAN-API) The CAN layer 2 drivers for Windows and Linux are included in the scope of delivery. Realtime OS (NTCAN-API) CAN layer 2 drivers for QNX, RTX(64), VxWorks® and On Time RTOS-32 can be ordered separately. Higher Layer Protocols (Classical CAN application only) Higher Layer Protocols are available for many operating systems (see order info): • CANopen Master- and Slave-Stack •J1939 • ARINC825 Additional free-of-charge esd CAN tools for Windows are downloadable from our website. The tools offer efficient setup and analysis of CAN applications and networks. Customization on Request Customized options are available for customized serial production in reasonable quantities. Please contact our sales team for detailed information. Order Information: PCI Express Mini Interface: PCIe port PCI Express Spec. R1.0a, Link width 1x Form factor PCI Express® Mini Card Electromechanical Specification, Revision 1.2 CAN: Interface 2 interfaces according to ISO 11898-2, electrical isolation, CAN-PCIeMini/402-2: Bit rates from 10 Kbit/s up to 1 Mbit/s, CAN-PCIeMini/402-2-FD: Bit rates up to 5 Mbit/s CAN controller esdACC in EP4CGXAltera FPGA, CAN-PCIeMini/402-2: According to ISO 11898-1 CAN-PCIeMini/402-2-FD: According to ISO 11898-1:2015 General: Ambient temp. 0 °C ... +75 °C Rel. humidity Max. 90 % (non-condensing) Power supply 3.3 V: 2x CAN, Imax = 300 mA, Ityp = 220 mA Dimensions 30 mm x 51 mm Connector PCIe: Mini PCIe card edge connector CAN: 1x 9-pin DSUB per CAN channel, male CAN-PCIeMini/402-2 Active CAN Interface Card for Mini PCI C.2044.04 Express, 2x CAN, electrically isolated CAN-PCIeMini/402-2-FD Active CAN Interface Card for Mini PCI C.2044.64 Express, 2x CAN FD, electrically isolated Accessories CAN-PCIeMini/402-DSUB9 Adapter with 1x DSUB9 connector, C.2044.10 incl. cable, length: 150 mm Software Support’ CAN layer 2 drivers for Windows/Linux are included in delivery free of charge. Additional CAN layer 2 object licences including CD-ROM: CAN-DRV-LCD QNX C.1101.32 Higher CAN layer protocols including CD-ROM for Classical CAN: CANopen-LCD Windows/Linux, QNX, RTX or VxWorks C.1101.xx J1939 stack for Windows or Linux C. 1130.xx ARINC 825-LCD for Windows/Linux, QNX, RTX or VxWorks C. 1140.xx 1 For detailed information about driver availability for your operating system please contact our sales team. esd electronics gmbh Vahrenwalder Str. 207 30165 Hannover / Germany

CAN-PCIeMini/402-2(-FD)Driven by esdACC(-FD) (Advanced CAN Core) Basic Product Features: • CAN-PCIeMini/402-2: CAN ISO 11898-1 protocol compatibility, CAN-PCIeMini/402-2-FD: CAN ISO 11898-1:2015 • Tested and certified acc. to ISO CAN Conformance Tests “ISO 16845:2004 Road vehicles - Controller area network (CAN) - Conformance test plan" • 11-bit and 29-bit CAN IDs • Supported bit rates: CAN-PCIeMini/402-2: from 10 kbit/s up to 1 Mbit/s CAN-PCIeMini/402-2-FD: up to 5 Mbit/s • Receive buffer (64 CAN messages ) • Complete access to CAN error counters • Programmable error warning limit • Error...