MORE FLEXIBLE, MORE VERSATILE, FASTER TECHNICAL DATA Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools mounted onto the spinning tool head rotate around the material. This concept equally qualified for the manufacturing of small, medium and large lot size parts, contributes to the extremely high performance and cost savings achieved with escomatic machines. More flexible, more versatile, faster Thanks to the new design and to the use of two completely independent cross tables for the front and back machining units, the NM6 FLEXI breaks the limits of flexibility and performance. Two parts can be manufactured at the same time: one part machined in the turning and front machining unit while the second part positioned in the counter spindle is undergoing back and side operations. Turning Max. material diameter Work piece length standard Number of tools Max. toolhead speed Front machining unit (DUF) Number of powered tools axial Max. drilling diameter Max. tapping capacity Max. drilling speed Number of powered tools lateral (option) Max. drilling/milling speed Back machining unit (DUA) Max. speed of counter spindle Number of fixed tools axial Max. drilling diameter Max. tapping capacity Number of powered tools axial Number of powered tools lateral Max. drilling speed Max. drilling diameter Max. tapping capacity Very high profitability thanks to: • • • • • • Unrivaled productivity of the escomatic principle Very short turning times thanks to the proximity of tools 24 hours production facilitated by coil feeding No lost time due to bar loading Man-hour gain in material feeding Limited waist of material ends Technical features 5.5 MM Coolant/cutting fluid Tank capacity Flow rate of the pump 2.5 Max.PCS/MIN system pressure Chips container capacity Installed power Compressed air consumption Compressed air pressure CNC control FANUC Max. number of controlled axes Number of spindles Measuring system resolution Rapid feed BRASS Numerical control • The escomatic technology with 4 turning tools on the rotating tool head • Choice of escomatic cutting tools or inserts from other suppliers • High speed manufacturing thanks to the independent front and rear machining units permitting to work on 2 parts simultaneously • Flexibility of the straightening thanks to its’ electric drive and programming from the console • Improved quality of straightening by control over the rotating and traversing speed • Easy access for the operator granted by the complete opening of the frontal guarding • Easy programming by using the latest technologies of the Fanuc 0i-TF control Technical specifications Dimensions Length x Width x Hight L x W x H with coil reel Net weight Gross weigth Average sound pressure level Average sound power level Modifications reserved

MORE FLEXIBLE, MORE VERSATILE, FASTER escomatic.ch TURNING MATERIAL FEED The material is supplied into the machine from coil. A coil, depending on the type of material, usually has 30 to 60 kg and is unrolled from a reel independent of the machine. The material is pulled across the machine by the material feed system. The machine could be equipped with a bar loader replacing the straightening unit as well as the reel and its support. The material is fed through a guide bush into the rotating tool head. The turning and cutting is based on the unique escomatic principle in which four turning tools...