tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:20.00pt "Arial", sans-serif; } .font1 { font:31.00pt "Arial", sans-serif; } the rfrence www.escomatic.ch

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.40pt "Arial", sans-serif; } .font1 { font:5.95pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:19.00pt "Arial", sans-serif; } Unlike conventional lathes, escomatic lathes are based on a unique concept. The ma-terial, which is coil stock or bar, does not rotate. The cutting tools mounted onto the spinning tool head rotate around the material. This concept equally qualified for the manufacturing of small, medium and large lot size parts, contributes...

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:10.00pt "Arial", sans-serif; } .font2 { font:11.00pt "Arial", sans-serif; } .font3 { font:19.00pt "Arial", sans-serif; } .font4 { font:14.00pt "Trebuchet MS", sans-serif; } v 3 l U I I II I \ lilfl On1 A. MATERIAL FEED The material is supplied into the machine from coil. A coil, depending on the type of material, usually has 30 to 80 kg and is unrolled from a reel independent of the machine. The material is pulled across the machine by the material feed system. The machine could be equipped...

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.40pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:14.00pt "Arial", sans-serif; } .font5 { font:25.00pt "Arial", sans-serif; } .font6 { font:6.00pt "Impact", sans-serif; } .font7 { font:8.00pt "Impact", sans-serif; } escomatic NM 64X: 4 TECHNICALDATA Turning: Max. material diameter 6.50 mm Work piece length standard 60 mm Max. work piece length (option) 150 mm Max. number of cutting tools 4 Max. toolhead...