escomatic D2 / D5 > FLEX SEEPD 65PCS/MIN 2.413mm 0,724mm THE FASTESTSOLUTION www.escomatic.ch size="-3">

The material is supplied into the machine from coil. A coil, depending on the type of material, usually has 30 to 50 kg and is unrolled from a reel supported by the machine. The material is pulled across the machine by the material feed system. > The material is fed into the machine from a coil which becomes bar stock after the straightening process. It produces a bar with a straightness quality equivalent to standard bar stock. > The material is clamped between a set of grooved rollers and their rotation controls the feeding. The clamping pressure is adjustable and the grooves have the shape...

Maximum toolhead capacity 5 mmMaximum stroke length 80 mm Amount of cutting tools 2 Toolhead rotation speed, continuously variable 4 000/8 000 min-1Straightener rotation speed, continuously variable 4 000/8 000 min-1Cam shaft rotation speed programmable per section of degrees 1/100 min-1 Coolant Huile entire Weight 1050 kg Floor-space (W x L) 1560 x 1000 mm Modifications reserved The > system allows machining to be optimised while guaranteeing an extremely high level of productivity. This increases the advantages of cam machine performance. Thanks to the electronic control system, the re- volution...