D2 CNC brochure
4Pages

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:21.00pt "Arial", sans-serif; } the legend without cams at ioo pcs / min. www.escomatic.ch

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:10.00pt "Arial", sans-serif; } Unlike conventional lathes, escomatic lathes are based on a unique concept. The material, which is coil stock or bar, does not rotate. The cutting tools mounted onto the spinning tool head rotate around the material. This concept equally qualified for the manufacturing of small, medium and large lot size parts, contributes to the extremely high performance and cost savings achieved with escomatic machines.

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:18.00pt "Arial", sans-serif; } .font2 { font:21.00pt "Arial", sans-serif; } .font3 { font:25.00pt "Arial", sans-serif; } .font4 { font:14.00pt "Trebuchet MS", sans-serif; } escomatic D2 CNC: MATERIAL FEED The material is supplied into the machine from coil. A coil, depending on the type of material, usually has 30 to 50 kg and is unrolled from a reel supported by the machine. The material is pulled across the machine by the material feed system. MATERIAL STRAIGHTENING The material is...

brozura_doggy_k.indd tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Georgia", serif; } .font2 { font:7.00pt "Georgia", serif; } .font3 { font:6.00pt "Impact", sans-serif; } .font4 { font:7.00pt "Impact", sans-serif; } .font5 { font:8.00pt "Impact", sans-serif; } .font6 { font:22.00pt "Lucida Sans Unicode", sans-serif; } escomatic D2CNC: 4 TECHNICAL DATA Turning: Maximum part diameter 4 mm Maximum workpiece lenght 80 mm Number of cutting tools 2 Max. tool head speed 12'000 min-1 D2 tooling can be used Material feed rate...