Machinery
9Pages

FIAT BELTS

INDEX Machinery for conveyor belts Machinery for flat belts Circular slitter LCCB500 Circular slitter LCCB300 Skiving machine LBCE300 LPCE300 press Portable press LPCZ100 Portable press LPCZ50 Portable press LPCZ30

Circular slitter for transmission belts LCCB500 - working width 500 mm - Technical characteristics: • • • • • • • • • • • • It enables belts of up to 7 mm thick (one or more at a time) to be cut, with a minimum cut width of 2 mm to a maximum of 500 mm. 1 to 100 mm separators for carrying out precise cuts of any width. Maximum number of cuts at one time: 25 (depending on the type and thickness of the belts) Adjustable speed by means of a frequency converter, controlled by a potientiometer situated on the top of the machine. Range of speeds from 0 to 20 m/min. Motor operated by a pedal that...

Circular slitter for transmission belts LCCB300 - working width 300 mm - Frequency converter Technical characteristics: • • • • • • • • • • • It enables belts of up to 7 mm thick (one or more at a time) to be cut, with a minimum cut width of 2 mm to a maximum of 300 mm. 1 to 100 mm separators for carrying out precise cuts of any width. Maximum number of cuts at one time: 10 (depending on the type and thickness of the belts) Adjustable speed by means of a frequency converter, controlled by a potientiometer situated on the top of the machine. Range of speeds from 0 to 20 m/min. Motor operated...

Transmission belt skiving machine LBCE300 -working width 300 mmSkiving machine LBCE300 Technical characteristics: • The LBCE300 skiving machine enables the ends of transmission belts to be narrowed down from 8 mm, for top quality splicing. • Easy to use, ideal for both workshop and on-site splicing.. • Maximum width: 300 mm • Machine dimensions, with drill included: • Length: 400 mm • Width: 700 mm • Height: 390 mm • Weight of skiving machine: 14 kg. Optional accesories: LBCET01 drill for the skiving cylinder • Bosch GMB13HRE drill (at 550/600 r.p.m.) for the skiving cylinder. • Voltage:...

Press for Transmission Belts LPCE300 - working width 300 mm A portable press for splicing transmission belts, providing an excellent finish. Technical Characteristics: • Maximum belt thickness:10 mm • Minimum admissible unrolled length: • • on the top part of the press: 900 mm. on the bottom part, it depends on the table or base the client has installed (700 mm in the esbelt workshop). • Strong structure forged from tempered aluminium, offering maximum strength and minimum weight. • Even tightening system. • Anodised aluminium clamps, to prevent the belt moving during the splicing process....

Portable transmission belt press LPCZ100 - working width 100 mm Easy to use portable press for splicing transmisssion belts. Technical characteristics: • Maximum recommended belt thickness: 8 mm • Minimum admissable unrolled length: 700 mm (For shorter lengths, consult the Technical Dept.) • Fitted with clamps to prevent the belt moving during the splicing process. • Greater widths may be used by changing the clamp screws. • Made of cast aluminium. • Temperature control. • Recommended working temperature 115 - 120oC. • Heating system: upper plate. • Pressure: manual • Plate working...

Portable transmission belt press LPCZ50 - working width 50 mm Easy-to-use portable press, for splicing transmission belts. Technical characteristics: • Max. belt thickness: may be used with any belt thickness. • Minimum admissable unrolled legth: 520 mm (For shorter lengths, consult the Technical Dept.) • Easy to set up and use. • Its compact size makes it invaluable in assembling belts in series (e.g cardboard factories, printing presses) - where other presses are too big. • Aluminium structure (more resistant than Bakelite). • Heating system in the upper plate, reaching a temperature of...

“Clamp” type press for transmission belts LPCZ30 - working width 30 mm – Easy-to-use portable press for splicing transmission belts. Technical characteristics: • Maximum belt thickness: 6 mm • Minimum admissable unrolled length: 225 mm (For shorter lengths, consult the Technical Dept.) • Easy to use and assemble. • Its compact size means it is an essential tool for mounting belts in series where other presses are too big to use. • Made of aluminium. • Heating system in both upper and lower plates. • Temperature control • Recommended working temperature 115 - 120 oC. • Extra quick splicing...