Mini Vertical Bridge Board for SATA Device to IDE MotherBoard The adapter ADA-SATA-IDE40-LY transforms a SATA signal into an IDE signal and allows to connect a SATA device (e.g. 2.5” or 3.5” HDD, CD-ROM drive) to an IDE connector on a main board. DISCLAIMER: In the absence of confirmation by device specification sheets, ES&S Solutions GmbH takes no responsibility for any defects that occur in equipment using any of ES&S´s devices, shown in catalogs, data books, etc. Contact ES&S in order to obtain the latest device specification sheets before using any ES&S´s device. ES&S reserves the right to make changes in the specifications, characteristics, data, materials, structures and other contents described herein at any time without notice in order to improve design or reliability. Contact ES&S in order to obtain the latest specification sheets before using any ES&S´s device. Manufacturing locations are also subject to change without notice. Observe the following points when using any device in this publication. ES&S takes no responsibility for damage caused by improper use of the devices. ES&S´s devices shall not be used for equipment that requires extremely high level of reliability, such as: -Military and space applications -Nuclear power control equipment -Medical equipment for life support side 1: 40-pin header, pitch 2.54 mm side 2: 7+15-pin SATA connector

1. Functional description The adapter ADA-SATA-IDE40-LY transforms a SATA signal into an IDE signal and allows to connect a SATA device (e.g. 2.5” or 3.5” HDD, CD-ROM drive) to an IDE connector on a main board. Features: l l l side 1: 40-pin header, pitch 2.54 mm side 2: 7+15-pin SATA connector supports any type of SATA devices (DVD, DVD-RAM,MO, CD-ROM, CD-RW, 2.5”/3.5” Hard Disk….) 48 bits LBA also supports HDD larger than 137 GB mini board size (75 mm x 26 mm) compatible with Serial ATA 1.0a specifications supports spread spectrum in receiver compatible with ATA specifications...

male IDC 2x20-pin header with pitch R = 2.54 mm ADA-SATA-IDE40-LY 4-pin floppy power supply connector power cable included 4. Temperature ranges Operating temperature: -20°C to 85°C ES&S Solutions GmbH · Gewerbering 2 · 41751 Viersen · GERMANY · www.esskabel.de fon: +49 (0)2162 - 266 18 0 · fax: +49 (0)2162 - 266 18 88 · [email protected] Storage temperature: -40°C to 85°C DISCLAIMER: In the absence of confirmation by device specification sheets, ES&S Solutions GmbH takes no responsibility for any defects that occur in equipment using any of ES&S´s devices, shown in catalogs, data...

4. Temperature ranges Operating temperature: -20°C to 85°C Storage temperature: -40°C to 85°C 5. Weight Weight without packaging: 30.4 g Weight with packaging: 37.2 g DISCLAIMER: In the absence of confirmation by device specification sheets, ES&S Solutions GmbH takes no responsibility for any defects that occur in equipment using any of ES&S´s devices, shown in catalogs, data books, etc. Contact ES&S in order to obtain the latest device specification sheets before using any ES&S´s device. ES&S reserves the right to make changes in the specifications, characteristics, data, materials, structures...