IDE-Adapter 2.00mm <-> 2.54mm with fixing holes 1. Functional description ES&S Oliver Reiners e.K. · Gewerbering 2 · 41751 Viersen · GERMANY · www.esskabel.de fon: +49 (0)2162 - 266 18 0 · fax: +49 (0)2162 - 266 18 88 · [email protected] This IDE adapter enables the transformation of IDE signals from 3.5' 'to 2.5'' interface as well as from 3.5'' to 2.5'' interface. An additional power supply is integrated and can be used if necessary. Additonally to the adapter ADA-IDE-2.00-2.54, 2 fixing holes are prepared. Additonally to the adapter ADA-IDE-2.00-2.54, 2 fixing holes are prepared. DISCLAIMER: In the absence of confirmation by device specification sheets, ES&S Oliver Reiners takes no responsibility for any defects that occur in equipment using any of ES&S´s devices, shown in catalogs, data books, etc. Contact ES&S in order to obtain the latest device specification sheets before using any ES&S´s device. ES&S reserves the right to make changes in the specifications, characteristics, data, materials, structures and other contents described herein at any time without notice in order to improve design or reliability. Contact ES&S in order to obtain the latest specification sheets before using any ES&S´s device. Manufacturing locations are also subject to change without notice. Observe the following points when using any device in this publication. ES&S takes no responsibility for damage caused by improper use of the devices. ES&S´s devices shall not be used for equipment that requires extremely high level of reliability, such as: -Military and space applications -Nuclear power control equipment -Medical equipment for life support standard IDE interface converter 3,5'' (40 pin, R= 2.54 mm) to 2,5'' (44 pin, R= 2.00 mm) as well as 2,5'' (44 pin, R= 2.00 mm) to3,5'' (40 pin, R= 2.54 mm)

1. Functional description This IDE adapter enables the transformation of IDE signals from 3.5' 'to 2.5'' interface as well as from 3.5'' to 2.5'' interface. An additional power supply is integrated and can be used if necessary. Additonally to the adapter ADA-IDE-2.00-2.54, 2 fixing holes are prepared. Additonally to the adapter ADA-IDE-2.00-2.54, 2 fixing holes are prepared. l standard IDE interface converter 3,5'' (40 pin, R= 2.54 mm) to 2,5'' (44 pin, R= 2.00 mm) as well as 2,5'' (44 pin, R= 2.00 mm) to3,5'' (40 pin, R= 2.54 mm) suitable flat cables customized can be made additionally 4pin....

4. Temperature ranges Operating temperature: -20°C to 85°C Storage temperature: -40°C to 85°C 5. Weight Weight without packaging: 12.7 g DISCLAIMER: In the absence of confirmation by device specification sheets, ES&S Oliver Reiners takes no responsibility for any defects that occur in equipment using any of ES&S´s devices, shown in catalogs, data books, etc. Contact ES&S in order to obtain the latest device specification sheets before using any ES&S´s device. ES&S reserves the right to make changes in the specifications, characteristics, data, materials, structures and other contents described...