Friability/Abrasion Tester TAR The TAR series is a USP/EP/JP compliant ERWEKA unit for testing friability and abrasion. Programming is easily performed by the symbol keypad. The rotation speed can be set between 20 and 100 rpm and the test run duration can be set either in time or total number of revolutions. During the test run the actual rotation speed and the test run duration is shown on bright LE displays. The unit is available with 1 (TAR 120) or 2 (TAR 220) test drums. Features TAR ■ Compatible with ERWEKA friability and abrasion drums ■ Automatic removal of tablets after the friability test run ■ DC frequency motor with constant actual/nominal adjustment for adjustable speed ■ Built-in timer ■ Switching leg for 10° adjustment ■ Membrane function keys for pre-selection of the test runtime in either number of turns or time and rotation speed ■ Available for 1 of 2 drums ■ USB interface for print-out Technical Data Instrument Operation Membrane keypad Power consumption Speed control Speed range Revolution counter Options + Friability drums left or right (with opening for automatic emptying) + Abrasion drums left or right + CoC (certificate of compliance), per drum + Spare part kit for TAR 120/220 + IQ/OQ/PV service, IQ/OQ/PV documents + RS Tablets (75 pieces), certified Technical specifications for the products described are stated without warranty and subject to change at any time without futher notice. v.1.3.4.19 ERWEKA GmbH [email protected] +49 6103 92426-200 Pittlerstr. 45 63225 Langen Germany Friability / Abrasion For larger samples the complete unit can be set to the european pharmacopoeia required 10° position by a standard