Ideal for R&D and small scale production ERWEKA’s All-Purpose equipment is ideal for small scale production in the pharmaceutical, chemical, cosmetic and food industries. In addition, it fits perfectly into R&D and the development of powder tablets, ointments, creames and more. The modular design is compact, economical and offers a powerful motor drive with a wide range of easily interchangeable attachments for various purposes. The different possibilities are as follows: ■ ■ ■ ■ ■ Stirring Kneading Mixing Granulating Coating Emergency switch Polishing Milling Filling Dosing Start & Stop Setting...

The ERWEKA All-Purpose system is based on a powerful drive unit available in two versions. The various attachments can be easily and quickly connected by means of a coupling. The drive unit AR 403 is equipped with a threephase AC motor. The sturdy ball bearing worm gear drive is completely maintenance free and provides an output torque of max 23 Nm. The unit features variable electronic speed control between 20 and 400 rpm. A digital dial regulates the speed. A special setup mode limits the rotations per minute to 20 rpm to ensure save installation of the attachments. Through permanent nominal/actual...

AR 403 Attachments ERWEKA UG Version 2 – Universal Gear The new Universal Gear uses a modernised CNC machined aluminium design for improved durability. It is required for adjusting the angle of operation (±40°) and reduction of speed (1:5,75). The UG is required for the operation of ■ Ball mills (KM) ■ Cube Mixer (KB 15/20) ■ Double Cone Mixer (DKM) ■ Pelletizer (GTE) ■ Coating pan (DKE) ■ Polishing drum (PT) ERWEKA CM 60/UD – Conical Mill the rotor and screen (0.5 mm to 3.0 mm) is supplied. It allows a flow rate of up to max 40 kg / h with a rotor speed of 0 1200 rpm. A safety interlock helps...

ERWEKA KB – Cube Mixer The Cube Mixer uses a tumbling motion to produce a homogenous blend within a short time. The mixing action is assisted by three stainless steel rods positioned inside the cube. The device is attached to the drive unit via the ERWEKA Universal Gear UG, which permits operation at various angles for optimal efficiency. Our cube mixers are available in the following versions: ■ KB 15 cube mixer made of acrylic glass, 3.5 l volume, opt. working capacity: 40% ■ KB 20 cube mixer made of acrylic glass, 8 l volume, opt. working capacity: 40% ■ KB 20 S cube mixer made of stainless...

ERWEKA DKM – Double Cone Mixer The Double Cone Mixer allows mixing of free flowing powders and granules. The mixing vessel (11,9 liter volume, working capacity 50 %) is made of stainless steel. The arrangement of the mixer in combination with the angle adjustment of the universal gear UG allows a multi-dimensional mixing process. ERWEKA SW 1/S – Laboratory High Speed Mixer The Laboratory High Speed Mixer operates with the plough-share principle for mixing of powders, granules and other products of fibrous nature. down for charging and emptying. A safety switch ensures that the drive unit AR 403...

ERWEKA PRS – Planetary Stirrer Planetary stirring unit for mixing of ointments creams, pastes, moist powders and liquids. This powerful mixing attachment comes with various mixing / stirring accessories e.g. kneading hook, mixing paddle, whisk and a fluoropolymer scraper for removing any product adhering to the side of the bowl, thus ensuring a homogenous mixing in the shortest possible time. The stirring/mixing accessories and vessel (5 liter volume, working capacity 60 %) are made out of stainless steel. Optionally an electric heated bowl DER or a double jacket bowl DW for heating and cooling...

ERWEKA FDS II – Salve Filling Machine Filling and Dosing Dosing Machine FDS is suitable for filling precise quantities of ointments, lotions, emulsions and similar products into tubes, cans, bottles etc.. The standard unit has a dosing range of 10-200 ml. Quick removal of the pump and hopper (19 liter volume) for cleaning. Filling nozzles of 2, 4 and 8 mm are part of the standard package. An additional cylinder unit to accommodate the filling range from 0.5 to 25 ml together with dispense heads with different apertures and special heads for filling tubes are available on request. The FDS can...

ERWEKA TG 2000 – Double Roll Crusher The rollers are 70 mm long and made of stainless steel. They are equipped with teeth to produce a powerful grinding action by forcing the material against a series of braking combs. All parts coming into contact with the product are made of stainless steel. The maximum capacity of the double roll crusher is 20 kg / hour. An emergency stop helps to prevent injuries. Double Roll Crusher with two driven rollers running in opposing directions from the inside to the outside. ERWEKA FGS II – Wet Granulator Wet Granulator with oscillating rotor for the production...

Attachment Specifications Capacity VT UG Volume Output required required Max. Max. Unit Conical Mill Ball Mill Double Cone Mixer Drum Hoop Mixer Planetary Stirrer Laboratory Kneader Salve Filling Machine Polishing Drum Double Roll Crusher Salves / Powders Granules Creams Cube Mixer

Tablet Press EP-1 The EP-1 is the ideal desktop tablet press for R&D purposes. The single punch eccentric Tablet Press EP-1 can manufacture tablets and odd shaped products with a diameter of up to 20 mm. It operates automatically i.e. the die is filled with powder or granule, the material compressed and the tablet ejected continuously. The compression force of up to 3 tons and the filling depth of up to 17 mm are easy to adjust. All components are either covered with hard chrome, or made of stainless steel AISI 304 or acrylic glass for the front door. The throughput is max. 4.000 strokes per...

Contact Are you curious and want to find out more? Head over to our website and download our product brochures, watch videos of our equipment in action or find the ERWEKA dealer of your country. ERWEKA GmbH Pittlerstr. 45 63225 Langen Germany Technical specifications of the described products are stated without obligation and subject to change at any time. v. 2.5.6.21