*mydirectindustry

Catalogs
Ersa GmbH
Ersa know-how transfer

Ersa know-how transfer

Product catalog summary

Introduction
ERSADUR long-life soldering tips are engineered for continuous use and high-quality soldering results. They feature a unique galvanic iron coating and a protective chrome layer to prevent corrosion and oxidation, ensuring excellent thermal conductivity and protecting the heating element from overheating.

Specifications
The soldering tips are composed of a copper body with layers of iron, nickel, and chrome plating. This construction is exclusive to Ersa and is designed to extend the tip's lifespan and maintain soldering quality.

Tip Reactivation Procedure

Set the temperature to 250 – 270 °C (482 – 518 °F).
Insert the wettable area of the tip into the reactivator paste and move slightly.
Clean off reactivator residues and add new solder after cleaning.
Utilize the standby temperature function and shutdown feature of the soldering station.
Use only original Ersa soldering tips.

Extending Tip Lifetime

Maintain a reasonable tip temperature of 340 – 360 °C for lead-free solder.
Regularly replace dirty metal wool in the dry cleaner and avoid sticking the tip too deep.
Use a brass brush for difficult-to-clean tips, avoiding steel brushes.
Ensure sponges are damp, not wet, and add new solder immediately after cleaning.

Cleaning Mistakes to Avoid

Avoid using abrasives and chemicals.
Do not use inappropriate pliers or store tips improperly.
Ensure tips are stored on brass pins and not in a stand with the opening upwards.

Exchanging Soldering Tips
Switch off the station, unscrew the tip, and remove it using tweezers. Store the tips correctly to prevent contamination and damage.

Catalog excerpts

ERSADUR long-life soldering tips Ersa know-how transfer Correct tip care for best soldering quality and a long lifetime Tip reactivator (without abrasives) Stick wettable area of the tip into the reactivator paste (0TR02/SB) and move slightly Clean from tip reactivator residues Add new solder after cleaning Nickel plating Chrome plating Iron plating Wettable area (pretinned) Cross-section Ersa soldering tip Use standby temperature function Use soldering station shutdown Ersa GmbH Leonhard-Karl-Straße 24 97877 Wertheim Telefon: +49 9342 800-0 Telefax: +49 9342 800-100 [email protected] www.ersa.com Use original Esra soldering tips only! 324 866 - 0317 | subject to change | © Ersa GmbH ERSADUR long-life tips are designed for continuous operation and for high-quality results. They are galvanically plated with an iron coating and protected against corrosion and oxidation by an additional chrome layer. This manufacturing process was developed and is used exclusively by Ersa. The ERSADUR tips’ perfect thermal conductivity protects the heating element from overheating and premature wear. Ersa offers a comprehensive range of soldering tips for the diverse requir

Open the catalog to page 1

How to clean soldering tips? Dry cleaning by metal wool Other mistakes in tip cleaning Dry cleaning by brush Difficult to clean: Large area and odd shape tips Alternative method: Clean by brass brush (3ZT00051) How to exchange soldering tips? Dirty dry cleaner (flux and oxides) Remove dirty metal wool and empty the solder collecting box Don´t brush towards the handpiece Just stick soldering tip into dry cleaner and turn Damp sponge cleaning Don´t stick in too deep! Sponge (0003B) must be damp Add new solder after cleaning Don´t use a steel brush Switch off station, unscrew tip Remove it to stand...

Open the catalog to page 2

All Ersa GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list