Technical highlights: Ersa Hybrid Rework System HR 200Rework out of the Box! - As easy as one, two, three. Ersa Hybrid Rework System HR 200 Unpack, setup, solder! It's simple as that to rework a PCB nowadays. The Ersa hybrid rework system HR 200 contains a 400 W hybrid high-power heating element to desolder and solder SMT components up to 30 x 30 mm. In addition, the system can operate a powerful 800 W infrared heating plate. This bottom heater guarantees ideal preheating of the assembly to rework. The operator selects the required power for top and bottom heating with a control knob, each with four levels. A foot switch activates the heating process. The operator's hands are free to remove the desoldered component with appropriate tools. Depending on the assembly and the preselected power a typical soldering time for components can range from 60 to 180 s (1 -3 min). During working breaks, the bottom heater switches back to standby level. The integrated PCB holder locates the assembly in optimum working distance to top and bottom heater. Ersa recommends an optional cooling fan, a thermocouple and a temperature-measuring instrument to complete the workplace. Additional accessories including a Reflow Process Camera to observe the soldering processes rounds off the equipment.

Technical data: Easy parameter setup Order information: Order No. Description Hybrid Rework System 0HR200-HP Ersa HR 200 Hybrid Rework System with heating plate Accessories * Expectable soldering time, depending on application an preheating with bottom heater. Due to individual settings the HR 200 Hybrid Rework System can handle every job Ersa GmbH Leonhard-Karl-Str. 24 97877 Wertheim Germany France [email protected] America [email protected] Mexico [email protected] China [email protected] Visit www.ersa.com for further information! 297 621 - 11/2015 | subject to change!...