video corpo

VS1-VS2-VS3

VS1-VS2-VS3

Product catalog summary
Standard Features
  • Construction: Two or three-piece bolted body.
  • Port Options: Reduced bore, full bore, or fully piggable.
  • Stem Retention: Anti blow-out stem.
  • Leakage Rate: ISO 5208 rate A for soft seated, rate D for metal seated.
  • Antistatic Device: Included, providing an electric conductive connection for anti-static function.
  • Pressure Relief: Automatic cavity relief to prevent overpressure.
  • Sealing: Bi-directional, Double block & bleed (DBB), with options for DIB-1 & 2.
  • Materials: Metal seated with Tungsten or Chrome Carbide coatings, soft seated with thermoplastic polymers.
  • Elastomers: FKM, HNBR, EPDM O-Rings, with special elastomers available upon request.
  • Additional Features: Drain and vent connections, grease injectors, lifting points, and support feet for larger sizes.
  • Valve Operation: Lever, Gearbox, or Actuator with position indicator and locking device.
General Construction

Trunnion ball valves feature obturators bounded by trunnions, preventing axial displacement. Line pressure compresses the seat onto the ball, ensuring sealing. These valves offer automatic cavity relief for overpressure and are suitable for a wide range of applications without specific size or pressure limits.

Materials of Construction
  • Low Temperature and Low Alloy Carbon Steel
  • Stainless Steel, Duplex, and Super Duplex
  • Nickel Alloys
  • Titanium
  • Bronze
Applications
  • Utility
  • Corrosive & Dirty Environments
  • Low Temperature
  • High Pressure
Technical Data
  • Design Standards: API 6D, API 6DSS, API 6A, ASME B16.34, ISO 14313, ISO 10423, ISO 17292.
  • Design Pressure: ASME B16.34, EN 1092-1, ISO 17292.
  • Body Wall Thickness: ASME B16.34, ASME VIII Div. I, ISO 17292.
  • Temperature Range: -50° to 200°C (-58° to 392°F).
  • Pressure Range: PN20 (ANSI 150) to PN420 (ANSI 2500).
  • Size Range: DN15 (1/2") to DN1400 (56").
  • End Connections: Various flanged and butt-weld options.
Approvals
  • Safety Integrity Level: SIL 3.
  • Fire Safe: API 607, API 6FA, BS 6755, ISO 10497-5.
  • Area Classification: ATEX 94/9/EC.
  • Pressure Equipment Directive: PED 97/23/EC.
  • Fugitive Emission: ISO 15848/1.
  • Construction: API 6D, API 6DSS.
See more

Catalog excerpts

VS1-VS2-VS3-1

esse s.r.i. trunnion & floating ball valves STANDARD FEATURES! End connections ASME B16.5 < DN600 (24") Flanged RF,FF,RTJ MSS-SP-44 = DN550 (22") Flanged RF,FF,RTJ ASME B16.47 A > DN650 (26") Flanged RF,FF,RTJ ASME B16.25 Butt-Weld BW Clump (HUB) UTILITY CORROSIVE & DIRTY low temperature! HIGH PRESSURE All data stated in this sheet are subject to changes and amendments which will be not notified and are for general information only. Erreesse disclaims any liability for damages occurred due to his wrong use and interpretation. Erreesse s.r.l. Via delle Betulle 8A/8B/8C, 28075 Grignasco (NO) Italy - 0039 0163 415901 - 0039 0163 415941 - [email protected]

 Open the catalog to page 1

All ERREESSE srl catalogs and technical brochures

  1. MMD

    1  Page

  2. VD1

    1  Page

  3. VD3–VD4

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.