• Construction: Two or three-piece bolted body.
• Port Options: Reduced bore, full bore, or fully piggable.
• Stem Retention: Anti blow-out stem.
• Leakage Rate: ISO 5208 rate A for soft seated, rate D for metal seated.
• Antistatic Device: Included, providing an electric conductive connection.
• Pressure Relief: Automatic cavity relief to prevent overpressure.
• Sealing: Bi-directional, Double block & bleed (DBB) with optional DIB-1&2.
• Seating Options: Metal seated with Tungsten or Chrome Carbide coatings, soft seated with thermoplastic polymers.
• Elastomers: FKM, HNBR, EPDM O-Rings, with special elastomers available upon request.
• Drain and Vent: Drilled and threaded connections for various sizes.
• Grease Injectors: Included for stem and seat, depending on size.
• Lifting Points and Support Feet: Included for larger sizes or heavier valves.
• Valve Operation: Lever, Gearbox, or Actuator with position indicator and locking device.
• Material Testing: Pressure containing parts tested to EN 10204 3.1, with NDT to API 6D, ASME B16.34.
• Valve Testing: Hydrostatic & pneumatic testing to API 6D, ASME B16.34, ISO 5208.

Trunnion ball valves feature a design where the ball is bounded by trunnions, preventing axial displacement. The line pressure compresses the seat onto the ball, ensuring sealing. These valves are suitable for a wide range of applications without specific size and pressure limits. They offer a compact and reliable alternative to multiple instrument valve systems, reducing leak paths and saving on installation and maintenance costs.

• Low Temperature and Low Alloy Carbon Steel
• Stainless Steel, Duplex, and Super Duplex
• Nickel Alloys
• Titanium
• Bronze

• Utility
• Corrosive & Dirty Environments
• Low Temperature
• High Pressure

• Design Standards: API 6D, API 6A, ASME B16.34, ISO 14313, ISO 10423, ISO 17292.
• Design Pressure: ASME B16.34, EN 1092-1, ISO 17292.
• Body Wall Thickness: ASME B16.34, ASME VIII Div. I, ISO 17292.
• Face to Face: API 6D, ASME B16.10 Long pattern.
• Temperature Range: -50° to 200°C (-58° to 392°F).
• Pressure Range: PN20 (ANSI 150) to PN420 (ANSI 2500).
• Size Range: DN15 (1/2") to DN1800 (72").
• End Connections: Various standards for flanged and butt-weld connections.

• Safety Integrity Level: SIL 3.
• Fire Safe: API 607, API 6FA, BS 6755, ISO 10497-5.
• Area Classification: ATEX 94/9/EC.
• Pressure Equipment Directive: PED 97/23/EC.
• Fugitive Emission: ISO 15848/1.
• Construction: API 6D.