Clamping and braking elements for linear guides and rods
10Pages

FOR LINEAR GUIDES AND RODS PNEUMATIC AND MANUAL UNITS

CLAMPING AND BRAKING ELEMENTS FOR LINEAR GUIDES AND RODS pneumatic and manual units Summary Nomenclature FRC pneumatic clamping element FRCDP double piston element FRCMC single cylinder element Within our own facilities, through the use of our own machinery we produce 95% of our completed product, thus eliminating the dependency upon outside sources. Because of this self-sufficiency, we are able to guarantee the reliability of components and a prompt response to engineering and design problems. FRCMAN manual clamping element FRCBS braking element for rods In addition to our standard...

Automation System Nomenclature Having gone through an adequate period of design, analysis, development and testing (5 million tightening cycles) Erre.Di. is able to offer locking devices for linear guides and rods that present the following characteristics: • • • • • High clamping force with minimum space required Extremely easy installation Carriage Locking without backlash or stiffening during the processing No reaction on the carriage and therefore no wear of the blocking parts Possibility to have, in the same space, a normally open blockage for both single and double effect, and a...

Automation System FRC pneumatic clamping element Standard Line The tightening is done using an amplification system with inclined plane. Made in construction steel, for high axial and horizontal stiffness. FRC##$ SE FRC##$ DE ## Guide size Operation type Body Operating Temp. Operation Pressure Limited length. High clamping forces. Precise positioning. High rigidity. Norm. Open Steel 5 ÷ 8 bar - Air connection M5 - We recomend use of compressed air hose ø6x4 FRC##$ SEM FRC##$ DEM ## Guide size Operation type Body Operating Temp. Operation Pressure Norm. Closed Steel -20°C ÷ 80°C 5 ÷ 8 bar...

Automation System FRCDP double piston element POWER LINE New line created to obtain a high clamping force in small spaces. Dual Locking Action: with a pair of pistons for each tightening part. FRC##$ SE FRC##$ DE ## Guide size Operation type Body Operating Temp. Operation Pressure Dual piston system: high clamping force. Small size. Short reaction time. Norm. Open Steel - Air connection M5 - We recomend use of compressed air hose ø6x4 ## Guide size $ Guide type Operating Temp. Operation Pressure Norm. Closed Steel -20°C ÷ 80°C 5 ÷ 8 bar Clamping force [N] Type Locking element without the...

Automation System FRCMC single cylinder element Locking element compact and inexpensive. These characteristics are obtained using a single contact section. The braking action is allowed by the floating system of the body that ensures: • the clamping of the rail guide on one side by the contact section and on the other by the body itself; • a symmetrical distribution of clamping force on the linear guide; • absolutely no friction between the linear guide with the body and with the contact section when the clamping is released. FRCMC##$ SE FRCMC##$ DE ## Guide size Guide type Operation type...

Automation System FRCMAN manual clamping element Simple and reliable, this clamping element is manually controlled. By acting on the adjustable locking lever (resumption handle), the contact profiles press with sync on the surfaces of the rail. The floating profiles of contact ensure a symmetrical distribution of force on the linear guide. The position of the manual lever is adjustable FCRMAN##$ ## Guide size Operation type Body Simple and inexpensive. Floating locking contacts Manual Steel

Automation System FRCBS braking element for rods The construction of the body in Ergal Aluminum allows to improve the mechanical properties of the element and to reduce the price. The double piston system produces clamping forces that are 50% higher than the normal mechanism, manteining a very limited size. Dual Locking Action: Uses a pair of pistons for each tightening part. The body of the locking element is made of Ergal Aluminum. FRCBS##SE FRCBS##DE Operation type Body Operating Temp. Operation Pressure 16 ÷ 25 Norm. Open Anodized Ergal Alluminum -20°C ÷ 80°C Operation type Body...

Automation System Special line FRCBSM rod blocking device ERRE.DI. Automation also produces special locking elements according to particular needs of customers ERRE.DI. provides added value by means of its capabilities and availability starting with the design stage: the best synergies with customers are made possible when there is real collaboration during the creation of new products. The rod bloking device can be used with rode bore from 20 to 25. The device is normally locked. It is unlocked by applying sa pneumatic signal. Therefore it is possible to block the cylinder in case of...

ERRE.DI. s.r.l. Offices and Plants: Via Dei Lavoratori, 15 20092 Cinisello Balsamo (MI) - Italy Tel. (+39) 02 66047168 - (+39) 02 66040229 Fax (+39) 02 6128041 www.erredisrl.it - automazione@erredisrl.it