*mydirectindustry

Grey Pro

Product catalog summary

Introduction
Grey Pro Resin is a photopolymer resin designed for use with Form 2 3D printers. It is known for its high precision, moderate elongation, and resistance to deformation over time, making it suitable for various engineering applications. The resin supports print resolutions of 100 and 50 microns and requires a Resin Tank LT.

Material Properties

Tensile Properties: The ultimate tensile strength is 35 MPa (green) and 61 MPa (post-cured), with a tensile modulus of 1.4 GPa (green) and 2.6 GPa (post-cured). Elongation is 32.5% (green) and 13% (post-cured).
Flexural Properties: Flexural stress at 5% strain is 39 MPa (green) and 86 MPa (post-cured), with a flexural modulus of 0.94 GPa (green) and 2.2 GPa (post-cured).
Impact Properties: Notched IZOD impact strength is 18.7 J/m (post-cured).
Temperature Properties: Heat deflection temperature at 1.8 MPa is 62.4°C, and at 0.45 MPa is 77.5°C. Thermal expansion is 78.5 µm/m/°C.

Solvent Compatibility
The resin's weight gain after 24 hours of immersion in various solvents is provided, indicating its compatibility. For example, it gains 10.77% weight in acetone and 0.02% in isooctane.

Disclaimer
Formlabs, Inc. states that the information is accurate to the best of their knowledge but does not guarantee the results obtained from its use.

Catalog excerpts

MATERIAL DATA SHEET Grey Pro Grey Pro MATERIAL DATA SHEET Photopolymer Resin for Form 2 Grey Pro Resin’s high precision, moderate elongation, and resistance to deformation over time make it a versatile material suitable for a wide range of engineering applications. Supports print resolutions: 100 and 50 microns. Requires Resin Tank LT. Photopolymer Resin for Form 2 Grey Pro Resin’s high precision, moderate elongation, and resistance to deformation over time make it a versatile material suitable for a wide range of engineering applications. Supports print resolutions: 100 and 50 microns. Requires Resin Tank LT. 216 boulevard André Brémont 95320 Saint-Leu-la-Forêt / France Tel : +33 1 34 14 62 67 Mail: [email protected] Internet : www.erpro-group.com To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warra

Open the catalog to page 1

216 boulevard Andre Bremont 95320 Saint-Leu-la-For£t / France

Open the catalog to page 2

Grey Pro

Grey Pro

Catalog excerpts

All Erpro Group catalogs and technical brochures