system solutions CleverClamp system

Clever clamping EROWA CleverClamp is the seamless, modular tooling system. Easy to handle and versatile in use, the EROWA CleverClamp decrease your set up times while increasing machine running times.

Enjoy the many benefits of EROWA’s CleverClamp tooling system. Thanks to the standardized EROWA UPC or MTS interface, CleverClamp workpiece carriers are quickly and accurately positioned on the machine and can be used universally. EROWA CleverClamp for clamping large workpieces with large holding power. Multiple clamping of identical or different workpieces on the same fixture. Clamping of workpieces with minimal clamping height. A wide selection of clamping elements and jaws holds any workpiece. The Facts • Easy to use. • Quick set-up of workpieces. • Modular extensions. • 5-side machining....

Everything fits together and can be flexibly combined. CleverClamp holds any workpiece and adapts to any machine situation.

Very high holding power and minimal clamping height (3 mm) are easily achieved with CleverClamp pull-down or linear stamping elements. By custom reworking of soft clamping and stop jaws, the clamping possibilities are almost unlimited. Clamp many workpieces and make optimized use of the full working area of the machine: CleverClamp mounted on EROWA mineral casting tower. Use of height increasing elements for clamping workpieces with large diameter. For 5-axis machining: Ensure optimal accessibility of the machine spindle to the workpiece by increasing height increases and serrated clamping elements....

Reliable base The base rails are the backbone of the CleverClamp workpiece holding system. They can be used horizontally or vertically. The suitable clamping elements can be placed quickly with the precise positioning grid. Base rails offer plenty of room in the smallest space for flexible fastening of different workpiece shapes and sizes. 01 | Precise positioning grid 2 mm. 02 | Scale for quick positioning of clamping elements. 03 | Automation Mounting hole for coupling for automated handling. 04 04 | Chucking spigots for quick and precise clamping of the base rail in the EROWA MTS tooling system....

Very convenient – the integrated scale with 2 mm gradation help in quick and repeatable positioning of the clamping elements during set-up. Very clever – the scale protects the mounting holes from contamination. Very precise – the dowel holes in a 50 mm grid allow you to position the base rails quickly and accurately on the machine table. - With mounted couplings and automation coupling (option) for direct integration in the EROWA MTS tooling system. CleverClamp base rails are available in various versions. - As a single rail for individual mounting on a machine, fixture, EROWA UPC or an MTS...

Faster setups The convenient and elaborate selection of different stop and clamping elements hold workpieces flexibly and accurately in any desired position. 01 | Stop element 02 | Clamping element as a pull-down or linear clamping element, depending on requirements. 03 | Locking bolt Threadedk spindle mechanism for the quick attachment of modules. 04 | Clamping jaw a suitable stop surface for every clamping process. 05 | Support in various versions and heights.

Stop elements Clamping elements The stop element is used in combination with a clamping element as a fixed jaw on the base rail. Available in widths of 48mm or 94mm and with different clamping surfaces as required. The clamping element holds the workpiece reliably and with great power. For multiple clamping, the clamping element also serves as stop element for further clamping. Available in widths of 48mm or 94mm (stamping elements only) and with different clamping surfaces and jaws as required. Clamping elements are available as pull-down and linear type elements. Pull-down clamping elements...

Everything fits Various types of clamping surfaces, additional clamping jaws and accessories make sure that each type of workpiece and material is mounted reliably. Whether round, angled or irregular workpiece shapes CleverClamp holds everything.

Select the appropriate properties of the clamping surface depending on the material and workpiece. Smooth clamping and stop sides – ideal for clamping of workpieces with finished surfaces. Clamping and stop sides with grip contour – ideal for clamping of raw material and workpieces with increased demands on holding power during machining. Clamping and stop side with stamping contour - ideal for clamping of raw parts at minimal clamping height and irregular parts. Ingenious stamping contour - The workpieces are held at 3 mm minimal clamping height with up to 1.6 tons of holding power (linear element)...

Clever technology to increase The CleverClamp workpiece is automatable throughout. The proportion of productive machine hours is significantly increased. £

By setting up and adjusting the workpieces outside the machine, time is optimally used and cost is reduced. The workpieces to be machined are palletized with CleverClamp and stored in the magazine of the handling unit. The EWIS™ identification system provides a clear overview of magazine locations and pallets. For setups with recurring workpieces: single part recognition with identification chip and the EROWA Manufacturing Control process control system. With the EROWA Process Control System, the operator is always in control of all data of the manufacturing cell. Integrated quality control -...

ER-035294 ER-099323 / set-up distance MTS 200 mm ER-099320 / set-up distance MTS 250 mm ER-099390 / automatable ER-099321 / set-up distance MTS 200 mm ER-099319 / set-up distance MTS 250 mm MTS base 4-fold Set-up distance 200mm / 250mm MTS 81 base Set-up distance 120mm MTS base 2-f

EROWA provides you with a full range of products everything fits together! Various accessories ••ER-099166 •ER-099195 •ER-099164 Parallel supports Parallel supports - wide M* = manual operation A* = automatic operation Grip contour Stamping contour The color icon describes the respective su