ED. 06 | 11.2019 Full-scale MicroCon 50 Pins

MicroCon - 0.8 mm Connectors DUAL ROW CONNECTOR MicroCon Female and Male Connector The dual-row MicroCon series with 0.8 mm pitch is ideal for various demanding applications in the industrial, medical, lighting, automotive and consumer market. Due to the small dimensions - the 50-pin male connectors show dimensions of only 24.2 mm x 4.7 mm with different heights - robustness was crucial during the development. The male connectors are provided with reinforced sidewalls. Secure mating is ensured by coding and blind-mate guide alignments, providing an increased locking range. A unique feature for...

MicroCon - 0.8 mm Connectors DUAL ROW CONNECTOR — TECHNICAL DETAILS Due to the different connector heights, Board-to-Board distances from 5 to 10 mm can be realized.

Stacked boards (Mezzanine) Extender card (coplanar) Orthogonal boards

MicroCon - 0.8 mm Connectors CONCEPT Orthogonal boards

ultra-reliable, dual-beam female contact rolled, homogeneous surface, guarantees secure contact mating wide contact surfaces between the mated pairs extremely low surface roughness minimizes abrasion low contact resistance ■ mating face polarization prevents mismating and incorrect connection ■ insertion chamfers in the capture range ensure secure mating ■ distinctive guide elements for precise insertion

MicroCon - 0.8 mm Connectors ADVANTAGES ROBUST SOLDER CLIPS outstanding retention forces on the circuit board soldering brackets absorb mechanical stress and are able to withstand high shock and vibration loads LOCKABLE CABLE ASSEMBLIES integrated locking lever; can be manually released without tools protection against accidental release of wire-toboard connections cable guide ensures strain relief

geometrically heterogeneous locating pegs for precise positioning on the circuit board enables best possible compensation of PCB holes for both positive and negative tolerances Board-to-Board Height

MicroCon - 0.8 mm Connectors PROCESSING TAPE AND REEL PACKAGING transport safe packaging and fully automatic assembly FULLY AUTOMATIC ASSEMBLY AND REFLOW SOLDERING for efficient processing on modern assembly lines

MicroCon - 0.8 mm Connectors MATING CONDITIONS ALLOWED INCLINATION FOR A SECURE SELF-CENTERING ALLOWED MISALIGNMENT TOLERANCES FOR A SECURE SELF-CENTERING

MicroCon - 0.8 mm Connectors CHARACTERISTICS —TECHNICAL DATA Description Current rating per contact IEC60512-5-2 Test 5b The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements. Insulation coordination according to IEC 60664-1 has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are spe-Operating voltage IEC 60664 cified for consideration as a part of the whole current path. In practice, reductions in creepage or clearance distances may occur due...

MicroCon - 0.8 mm Connectors CHARACTERISTICS — Description Reflow soldering JEDEC Housing Material

SMT Termination 12 - 100 pins possible tape and reel packaging for automatic as-semby blind mate guide alignment for secure mating for available part numbers please refer to our website DIMENSIONAL DRAWINGS Catalog E 074606

PRODUCT SPECIFICATION SMT Termination 12 - 100 pins possible tape and reel packaging for automatic as-semby blind mate guide alignment for secure mating for available part numbers please refer to our website DIMENSIONAL DRAWINGS

SMT Termination 12 - 100 pins possible various heights possible tape and reel packaging for automatic as-semby blind mate guide alignment for secure mating for available part numbers please refer to our website

SMT Termination 12 - 100 pins possible various heights possible tape and reel packaging for automatic as-semby blind mate guide alignment for secure mating for available part numbers please refer to our website

MicroCon - 0.8 mm Connectors CABLE ASSEMBLIES PRODUCT SPECIFICATION IDC termination 12 - 100 pins possible various cable length possible ribbon cable AWG 34 90° cable outlet blind mate guide alignment for secure mating for available part numbers please refer to our website DIMENSIONAL DRAWINGS

Find your correct contact person on erni.com/locations © ERNI International AG 2019 • Printed in Germany • A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI®, ERNI WoR&D®, CONNECTED BY COMPETENCE®, MicroBridge®, MicroCon®, MicroStac®, MicroSpeed®, MiniBridge®, MaxiBridge®, iBridge Ultra®, ERmet®, ERmet ZD®, ERmet ZDplus®, ERmet ZD HD®, ERbic®, ZipCon® and INTERact® are trademarks (registered or applied for in various countries) of ERNI Produc