Right Angle Connectors

STANDARD SOLUTIONS M12 - Male and Female Connectors Design Features • extremely space saving due to be placed on PCB central axis • identical Layout for male and female version • 4 - 8 pin configuration • gold plated contacts • IP 65/67 mated and locked condition • suitable for potting after assembly due to optional O-Ring • male and female can be used with housings which provide integrated M12 threads • optional 360° shield ring • integrated brackets for 3 different frequently-used PCB thicknesses, 1.0 / 1.6 / 2.0 mm • cylindrical base version, which is also usable for M12 sensor pipes • high...

M12 - Right Angle Connectors GENERAL STANDARD SOLUTIONS Processing Features • first M12 90° version which has full capability for automated pick and place assembly • T&R packaging • integrated pick & place area • pegs and integrated PCB support areas ensure a secure position while soldering • extremely robust due to pins soldered on top an bottom side of the PCB • lead-free reflow compatible • rear mounting of the final assembled PCB in a housing For technical data refer to ERNI document 225407 SENSOR PIPE SOLUTIONS This new development is an innovative product that have never been existed before....

M12 - Right Angle Connectors ASSEMBLY AND SOLDER RECOMMENDATIONS The connector has integrated PCB support points, which are able to adapt the 3 frequently-used PCB thicknesses. The thickest PCB could be 2.0 mm followed by the favorite 1.6 mm and further followed by the thinnest 1.0 mm. Note: Also other thicknesses in between of the mentioned range can be used, if the non centric position of the connector, in this case is taken into account. The support points have to be considered according the chosen PCB thickness, see drawing left hand side. The PCB has to be designed to provide those supports....

M12 - Right Angle Connectors DIMENSIONS AND ASSEMBLY RECOMMENDATION STANDARD M12 MALE (5-PIN) WITH ERNI LOCKING SHELL Gewinde-Löcher / Thread holes Standard-Löcher / Standard holes Mutter / Nut Montageloch für Verdrehschutz / Assembly hole for twist protection 7,5 mm 1-2 mm 12.3 M12 FEMALE (5-PIN) WITH ERNI LOCKING SHELL Gewinde-Löcher / Thread holes 7,5 mm Standard-Löcher / Standard holes Mutter / Nut Montageloch für Verdrehschutz / Assembly hole for twist protection 7,5 mm See product drawing or recommendations for use the M12 90° connectors together with housings which have already an integrated...

M12 - Right Angle Connectors ASSEMBLY EXAMPLE FOR SENSOR PIPE REAR MOUNTING SENSOR PIPE FRONT MOUNTING SENSOR PIPE

M12 - Right Angle Connectors LAYOUT, SHIELDING, PACKAGING AND SEALING OPTIONS LAYOUT RECOMMENDATION Sensor Pipe Application Standard Application Unshielded version Shielded version Solder paste Solder paste with solder Preform 5-pin version please refer to document 225321; 8-pin version refer to document 225508 The optional shield ring is soldered with two pins to the pcb. Electrical contact to the locking shell is given by three contact tongues placed at the outer contour of the shield ring. Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 250 Stück - Packaging unit: 250...

M12 - Right Angle Connectors LAYOUT, SHIELDING, PACKAGING AND SEALING OPTIONS SEALING OPTIONS M12 90° MALE CONNECTORS O-Ring sealing; locking shell / customer housing O-Ring sealing; connector / locking shell Minimal air gap at the stopping edge for resin, if potting is applied SEALING OPTIONS M12 90°FEMALE CONNECTORS Identical to male version; but an additional O-Ring is needed for sealing the connector interface acc. IEC-Standard.

M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT • right angle male • rear mount • with or without O-Ring • 4, 5 and 8-pin • shielded and unshielded versions Part Number shielded Part Number Coding Loaded Pins O-Ring v = early mate last break

M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT AND ADDITIONAL ANTI TWIST PROTECTION No. of Pins Used with locking shell 225635.

M12 - Right Angle Connectors MALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT, DI TYPE • right angle male • rear mount, DI • with or without O-Ring • 4, 5 and 8-pin • shielded and unshielded versions O-Ring can be used in reflow solder process.

M12 - Right Angle Connectors MALE CONNECTORS FOR SENSOR PIPE APPLICATIONSEND ASSEMBLY FRONT MOUNT • right angle male • front mount • with O-Ring • 4, 5 and 8-pin • shielded and unshielded versions

M12 - Right Angle Connectors MALE CONNECTORS FOR SENSOR PIPE APPLICATIONSEND ASSEMBLY FRONT MOUNT, ANTI TWIST VERSION No. of Pins

M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT • right angle female • rear mount • with or without O-Ring • 4, 5 and 8-pin • shielded and unshielded versions Part Number shielded Part Number Coding Loaded Pins O-Ring

M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT AND ADDITIONAL ANTI TWIST PROTECTION No. of Pins Used with locking shell 225636.

M12 - Right Angle Connectors FEMALE CONNECTORS FOR STANDARD APPLICATIONSEND ASSEMBLY REAR MOUNT, DI TYP • right angle female • rear mount, DI • with or without O-Ring • 4, 5 and 8-pin • shielded and unshielded versions O-Ring 225360 can be used in reflow solder process.

M12 - Right Angle Connectors ASSEMBLY PROCESS IMAGES PCB with solder paste PCB with solder paste and Pre-Form Multiple printed pcb in assembly machine Connector placed into solder paste Male solder joints Female solder joints

M12 - Right Angle Connectors ASSEMBLY PRODUCT IMAGES

Find your correct contact person on erni.com/locations © ERNI International AG 2019 • Printed in Germany • A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI®, ERNI WoR&D®, CONNECTED BY COMPETENCE®, MicroBridge®, MicroCon®, MicroStac®, MicroSpeed®, MiniBridge®, MaxiBridge®, iBridge Ultra®, ERmet®, ERmet ZD®, ERmet ZDplus®, ERmet ZD HD®, ERbic®, ZipCon® and INTERact® are trademarks (registered or applied for in various countries) of ERNI Produc