iBridge Ultra 2 mm Cable to Board Connectors

iBridge Ultra for rugged high vibration applications The iBridge Ultra connector family offers extensive Cable-to-Board solutions. It is designed for applications which need reliable and robust connection systems. A TPA (Terminal Position Assurance) retainer serves as a secondary lock for the female contact in the housing. The secondary lock makes the connections particularly resistant against strong vibrations, such as those that occur in an automotive application. iBridge Ultra is not limited to automotive and is a great choice for applications in industrial automation, telecommunications and...

TECHNICAL DETAILS Pitch No. of Pins Current rating per contact Termination Cable Variants 2 mm 2, 3, 4, 5, 6, 8, 10, 12 possible up to 8 A (depends on cable) Male connector with SMT or DIP solder termination Female connector with crimp termination Discrete wire AWG 22 and AWG 24 Vertical male connector Right angle male connector Female connector with 180° cable outlet

DOUBLE LOCKING SYSTEM Includes TPA (a retainer) feature which serves as a secondary lock to increase reliability by safe-guarding against accidental wire pulling and limits female contact movement in housing cavity, ultimately enhancing performance in high vibration and mechanical shock environments POLARIZATION AND LOCKING FEATURE Polarization feature for error proof mating Latches on both sides of female connectors provide positive locking and easy handling

Close box female contact design make sure male contact in secure position. Dual contact beam compensates misalignment mating tolerance Stamped contacts without post bending ensure robustness, coplanarity and current carrying efficiency

PCB RETENTION AND ERROR PROOF 2 location pegs round and oval - for accurate placement on PCB Long locating pegs for vertical male - enhance retention force Metal soldering clip for SMT -provides PCB retention and strain relief for contacts

Male Connector (DIP, SMT ) Female Connector (Crimp) 300 V r.m.s. (pollution degree 1), 95 V r.m.s. (pollution degree 2) Temperature range (USCAR) USCAR-2 Current rating per contact IEC60512 test 5b Air and creepage distance Operating voltage IEC 60664 Process Conditions Hand soldering temperature max. DIP soldering temperature max. Product Approval Validation testing

SMT termination 2, 3, 4, 5, 6, 8, 10, 12 pins possible tape and reel packaging for fully automated assembly process for available part numbers please refer to our website Layout: vorgeschlagene Toleranz fur PCB Layout + 0,05 recommended PCB layout tolerance ±0,05

DIP solder termination 2, 3, 4, 5, 6, 8, 10, 12 pins possible tube packaging for available part numbers please refer to our website

SMT termination 2, 3, 4, 5, 6, 8, 10, 12 pins possible tape and reel packaging for fully automated assembly process for available part numbers please refer to our website Layout: vorgeschlagene Toleranz fur PCB Layout ± 0,05 recommended PCB layout tolerance ±0.05

DIP solder termination 2, 3, 4, 5, 6, 8, 10, 12 pins possible tube packaging for available part numbers please refer to our website

cable connector housing and retainer 2, 3, 4, 5, 6, 8, 10, 12 pins possible 180° cable outlet for female crimp contacts AWG 22 and AWG 24 for available part numbers please refer to our website CABLE CONNECTOR HOUSING RETAINER ir l

female crimp contact AWG 22 and AWG 24 Reel packaging for available part numbers please refer to our website

Find your correct contact person on erni.com/locations © ERNI International AG 2020 • Printed in Germany • A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. ERNI®, ERNI WoR&D®, CONNECTED BY COMPETENCE®, MicroBridge®, MicroCon®, MicroStac®, MicroSpeed®, MiniBridge®, MaxiBridge®, iBridge Ultra®, ERmet®, ERmet ZD®, ERmet ZDplus®, ERmet ZD HD®, ERbic®, ZipCon® and INTERact® are trademarks (registered or applied for in various countries) of ERNI Produc